下载

记得

通讯

Subscribe to our newsletter.

要求

了解我们的许多工作机会,使他们在 Dr. Dietrich Müller GmbH 生涯下可以。我们正在寻找:

  • 批发和外贸业务员
  • 研究生电气工程师

工作

直接请求:

电话: +49(0)4435 97 10 10
传真: +49(0)4435 97 10 11
电子邮箱: info@~No~Spam~mueller-ahlhorn.com

诺梅克斯®

制品  订货单编号 描写 厚度于公厘 1) 于千伏/米 绝缘材品类 涂料 PDF
Nomex® Typ 410 FI 15000 芳纶纸压延 0,050 - 0,760 ≥17 H (180 °C) 羚羊 下载
Nomex® Typ 411 FI 15010 芳纶纸压延 0,130 - 0,580 ≥9 H (180 °C) 羚羊 下载
Nomex® Typ E56 FI 15011 芳纶纸压延 0,130 - 0,510 ≥15 H (180 °C) 羚羊 下载
Nomex® Typ 414 FI 15020 芳纶纸压延 0,090 - 0,380 ≥24 H (180 °C) 羚羊 下载
Nomex® Typ 993 FI 15030 芳纶纸板 1,000 - 4,000 ≥21 H (180 °C) 羚羊 下载
Nomex® Typ 994 FI 15040 芳纶纸板 1,000 - 9,600 ≥27 H (180 °C) 羚羊 下载
  • 耐热级别H(180°C)
  • 轧光或非轧光的聚芳酰胺纤维纸
  • 难燃烧
  • 良好的电击穿强度
  • 在低温下保持良好的物质稳定
  • 良好的耐酸和碱
  • 同样也供应Nomex板T993和T994

NOMEX®

Nomex® is a synthetic aromatic polyamide polymer generally known as an aramid.
The paper is produced from two forms of the aramid polymer:
small fibrous binder particles fibrids mixed with short fibres floc.

The two components are comboned in a water based slurry from which continuous sheet structure is produced on a fourdrinier paper making machine.

Subsequent densification and internal bonding is achieved by means of high temperature calendering. The resulting paper is mechanically strong, flexibJe and has good electrical properties, which are maintained at high temperatures.

Nomex® is officially classified as a 220°C insulating material by the Underwriters Laboratories -file E34739 and recognised by the principal institutes of the world.

 

 

 

Nomex® aramid pressboards

 

Increased thickness and rigidity set Nomex® aramid pressboards apart from the other forms of Nomex®. They are used for spacers and barriers in transformers, both liquid-filled and dry type, and as end-lams in motors. This family of products offers a range of mechanical properties which insures design flexibility in a variety of applications.

Type 992

is a low-density pressboard produced in two thicknesses (63 and 125 mils, or 1.6 and 3.2 mm) with a specific gravity of 0.5. This material's low density allows easy formation of complex shapes, and provides the highest saturability of the pressboard products.

Type 993

is a medium-density pressboard produced in eight thicknesses (40 to 240 mils, or 1.0 to 6.0 mm) with specific gravities of 0.7 to 0.9. This material provides a balance of rigidity and conformability along with outstanding saturability and excellent electrical properties in oil.

Type 994

is a densified version of Type 993, available in 11 thicknesses (40 to 380 mils, or 1.0 to 9.6 mm) with specific gravities from 1.1 to 1.2. It provides superior stability under compressive loads. Type 994 will also absorb oils and other fluids, but not as readily as Types 992 and 993.

 

 

Nomex® paper

Type 410

is the original form of Nomex® paper, and is widely used in a majority of electrical equipment applications. It is produced in 11 thicknesses (2 to 30 mils, or 0.05 to 0.76 mm) with specific gravities from 0.7 to 1.2. A calendered product, it has high inherent dielectric strength, mechanical toughness, flexibility and resilience. Type 410 is used in almost every known sheet insulation application.

Type 411

is the uncalendered precursor of Type 410. It is available in five thicknesses (5 to 23 mils, or 0.13 to 0.58 mm), with a specific gravity of 0.3 and correspondingly lower electrical and mechanical properties. It is used in applications such as motor phase insulation and transformer coil end filler, where high bulk and conformability are of prime importance. Type 411 offers increased impregnability and saturability when compared to Type 410.

Type 414

is electrically and thermally similar to Type 410, but is calendered under different conditions which produce a strong, but more flexible and conformable sheet. It is produced in five thicknesses (3.4 to 15 mils, or 0.09 to 0.38 mm) with specific gravities from 0.9 to 1.0. Type 414 was designed for use as slot insulation in hand-wound motors and for linear wrapping of wire, but is also used in other applications where its specific characteristics are desirable (such as folded or punched parts).

Type 418

also called Nomex® M aramid and mica paper is produced by adding 50 percent mica platelets, intimately blended with the floc and fibrids during papermaking. It is available in five thicknesses (3 to 14 mils, or 0.08 to 0.36 mm) and is designed for high-voltage applications, including motor conductor and coil wrap, and transformer ground and layer insulation. Type 418 is a calendered product with high inherent dielectric strength (750 to 1000 V/mil, or 30 to 40 kV/mm), but can also be readily impregnated with varnishes where this is desirable. Type 418 offers increased voltage endurance when compared to Type 410.

Type 419

also called Nomex® M aramid and mica paper is the uncalendered precursor of Type 418. It is available in two thicknesses (7 and 13 mils, or 0.18 and 0.33 mm) with a specific gravity of 0.5, for applications where conformance and saturability are required.

Nomex® papers are supplied in standard rolls in widths; the tolerance is +/- 4 mm for width 914 mm and +/- 7 mm for width 965 mm.
Different widths can be supplied upon request, starting from a minimum width of 6 mm with increments of 0,1 mm.
The cutting tolerance is +/- 0,2 mm.
Standard inside diameter is 76 mm and outside 292 mm.
Upon request, for some types of Nomex®, rolls with superior outside diameter and length can be supplied and widths up to 1828 mm.


content-middle-right-slide

content-middle-right-bottom



Λ