Downloads

Call-back

Newsletter

Subscribe to our newsletter.

Request

Jobs

Discover now our wide-ranged job offers and have a carreer at Dr. Dietrich Müller. We are looking for:

  • Wholesale and Foreign Trader
  • Graduated in Electrical Engineer

Press

PCIM Europe Nuremberg 2015

Thermally conductive pad: Thermipad TP 22715 with 15 W/mK

SPIE Smart Structures/NDE conference

Electronics & Components Hong Kong

Imports and exports of the electrical industry

Pertinax

InnoTrans Berlin

World Energy Engineering Congress Washington

Enova Paris

International Electric & Automation Show Bucharest

CFRP profiles

Energie Impulse Aachen

Water-jet cutting

 CWIEME in Berlin 2013

Coil Winding 2013

Thermiglue TL 23010

Coil Winding 2012

CWIEME Berlin 2012

Italian bobbin manufacturer

Working hours

NEC Birmingham UK

Advanced Engineering UK 2011

Clean Energy Expo Asia 2011

Contract 4S iPhone protectors

COMPOSITES EUROPE 2011

Electric Drives Production Conference

MOTEK 2011 and Bondexpo

IAA 2011

Norton TH

ArpaxX-Aramid Paper

Slot insulation material

Bern and public transport

Germany with great opportunities in the field of electric cars

Stamp parts from Valox for the lighting industry

Thermal management for LED – Applications

APTIV films are available as a new high performance materials

ArpaxX - push up the heat: Dr. Dietrich Müller GmbH

ZVEI: The Electrical Industry expects that the boom will continue in 2012

Lectures at the CWIEME Berlin 2011

CWIEME Berlin 2011: Dr. Dietrich Müller GmbH with a large product range

Increased Growth Forecast for the German Electrical Industry

Hannover Messe CoilTechnica:  A Good and Positive Response for Dr. Dietrich Müller

Delivery situation in Japan

FIEE: A resounding success for Dr. Dietrich Müller

FIEE ELÉTRICA 2011

Dr. Dietrich Müller: Punched parts made ​​of 3M VHB Tape

Dr. Dietrich Müller: Nomex® parts in self-adhesive version.

Dr. Müller GmbH CoilTechnica, Hannover.

Kapton MT in different varieties and Thermiflex

Dr. Müller GmbH: New product for the solar industry

Dr. Dietrich Müller registered as a UL – „Repackaged Recognized Components“ Company.

CWIEME Berlin 2010: Dr. Mueller in Ahlhorn

Dr. Mueller: High technology and innovation at one time in one venue

Dr. Müller GmbH continues its leadership as a supplier of Ultem films

Dr. Müller GmbH: New product line for films release

Dr. Müller proud of the opening of the Germany's first offshore wind park

Müller and Temac: Distribution agreement sealing materials

Get involved with the latest insulation product offerings at the Coil Winding 2010 – Dr. Müller GmbH

Pertinax®

Direct request:

Enquiries from the United Kingdom:

Dr. Dietrich Mueller UK Limited

Tel    +44 7549 834830
Fax   +44 2476 996466

info.uk@~No~Spam~mueller-ahlhorn.com

 

Enquiries from all other countries:

Tel: +49 4435 971010
Fax: +49 4435 971011
E-Mail: info@~No~Spam~mueller-ahlhorn.com

Let us know, which product you are
looking for and we will give you the
adress of the right distributor.

 

 

APTIV film grades

APTIV film is available in several grades according to the specific needs
of the end use application. Within each grade a broad range of
thicknesses are available from 6 to 750 microns (0.25 to 30 mils). The
standard width of APTIV film is 610 mm (24 in), although some films can be
provided in widths up to 1450 mm (57 in). On request, the stock rolls of
film can be further slit by Victrex to 50 mm (2 in) width. Matte/Gloss and
Gloss/Gloss surface finishes are standard. Other surface finishes may
be available upon request.

1000 Series

APTIV 1000 series films are unfilled semi-crystalline films. Available in
thicknesses from 8 to 750 microns, they are typically the mostly commonly
used grades in the product range.

1100 Series

APTIV 1100 series are mineral-filled semi-crystalline films with the filler
content being available at two loadings according to the application needs. The films are available in thicknesses from 12 microns upward. The film is typically specified where either a higher modulus or lower coefficient of thermal expansion is required.

1300 Black

APTIV 1300 Black is a cosmetic grade unfilled semi-crystalline film which
provides the same properties as the APTIV 1000 series natural colour film.
It is a suitable option when dark colour is a design requirement for applications such as acoustic speakers. Thicknesses range from 50 to 100 microns.

2000 Series

APTIV 2000 series films are unfilled amorphous films available in thicknesses from 6 microns up to 300 microns. The 2000 series of films are typically selected for processing to the semi-crystalline state using a thermoforming process, or where ductility or a level of optical clarity are required. When the amorphous film is subjected to temperatures above the glass transition temperature (Tg) of VICTREX PEEK polymer (143°C/289°F), the amorphous film will revert to the semi-crystalline form. This property is particularly advantageous when thermoforming parts from APTIV film.

2100 Series

APTIV 2100 series are mineral-filled amorphous films. Thicknesses are
available from 25 microns upward.
The film is typically specified where either a higher modulus or lower
coefficient of thermal expansion is required and are often processed to
the semi-crystalline form using a thermoforming process.

Secondary Processes

APTIV film can be subjected to a wide range of secondary process operations:

Plasma surface treatment for the promotion of adhesion.
Metallisation using a variety of deposition and lamination processes.
Thermoforming into highly detailed shaped parts.
Adhesiveless heat lamination to other polymers and metals.
Application of specialised coatings.
These secondary processes allow designers and engineers to obtain
the benefits of APTIV film properties in a variety of formats.

 

content-middle-right-slide

content-middle-right-bottom



Λ