Downloads

Rappel

Newsletter

Abonnez-vous à notre newsletter.

Demande

Emplois

Découvrez dès maintenant notre offre des emplois. Si vous désirez faire une carrière avec l´entreprise Dr. Dietrich Müller, nous sommes á la recherche de:

  • Responsable de commerce extérieur et de commerce de gros.
  • Diplômé de ingénieur électrique.

Presse

PCIM Europe Nuremberg 2015

Thermally conductive pad: Thermipad TP 22715 with 15 W/mK

SPIE Smart Structures/NDE conference

Electronics & Components Hong Kong

Imports and exports of the electrical industry

Pertinax

InnoTrans Berlin

World Energy Engineering Congress Washington

Enova Paris

International Electric & Automation Show Bucharest

CFRP profiles

Energie Impulse Aachen

Water-jet cutting

 CWIEME in Berlin 2013

Coil Winding 2013

Thermiglue TL 23010

Coil Winding 2012

CWIEME Berlin 2012

Italian bobbin manufacturer

Working hours

NEC Birmingham UK

Advanced Engineering UK 2011

Clean Energy Expo Asia 2011

Contract 4S iPhone protectors

COMPOSITES EUROPE 2011

Electric Drives Production Conference

MOTEK 2011 and Bondexpo

IAA 2011

Norton TH

ArpaxX-Aramid Paper

Slot insulation material

Bern and public transport

Les films APTIV sont disponibles comme des nouveaux matériaux de haute performance

ArpaxX – push up the heat

Dr. Müller GmbH: Un nouveau produit pour l'industrie solaire

Dr. Dietrich Müller - société enregistrée par UL

Berlin CWIEME 2010: GmbH Dr. Mueller

Dr. Mueller: Haute technologie et innovation au même endroit

Dr. Müller GmbH poursuit son leadership en tant que fournisseur de films Ultem

Dr. Müller GmbH: Nouvelle ligne de produits pour les films de sortie

Dr. Müller est fier de l'ouverture du premier parc éolien offshore en Allemagne

Müller et TEMAC: accord de distribution des joints d'étanchéité industrielle

Des produits compétitifs lors de la foire commercial de la bobine CWIEME 2010 - Dr Müller GmbH

Pertinax®

Demande directe:


Téléphone: +49 (0) 4435 97 10 10
Fax: +49 (0) 4435 97 10 11
E-Mail: info@mueller-ahlhorn.com

Kapton® (Kapton® is DuPont's registered trade mark) polyimide film is synthesized by polymerizing an aromatic dianhydride and an aromatic diamine.

With its excellent physical, chemical and electrical properties Kapton® film can be used in a wide temperature range (-269+400°C).

Kapton® is available in different versions according to the application. ´

The basic type is Kapton® HN.

Kapton® HN is mainly used for the insulation of electrical motors in class H and super H, in the production of adhesive tapes for dielectric uses and when resistance to extreme temperatures is required (as low as -269°C and as high as 400°C).

Kapton® VN is similar to the basis type, but it has a superior dimensional stability. Kapton® VN is mainly used in the production of flexible printed circuits. 

Kapton® FN is type HN coated on one or both sides with Teflon® FEP, that enhances chemical resistance and imparts heat sealability. FN type is used to cover cables and conductors for high temperatures.

Type XP is coated with Teflon® PFA and it can be used at higher countinuous temperatures (Teflon® FEP: 205°C Teflon® PFA: 260°C).

Kapton® CR (available also with a coating in Teflon®: FCR) was developed to withstand the damaging effects of "corona'.

Kapton® MT (available also in black: MTB and with a coating in Teflon®: FTM) is appropriated for all the applications where an high thermal conductivity is required.

Type FPC, in the different versions, is suitable for the production of flexible circuits.

For the realization of thermoformed shapes Kapton® HA and JP are the perfect solutions.

Kapton® KJ is a thermoplastic polyimide film suitable for operating at high temperature.

Type HKJ is a Kapton® film coated on one or both sides with Kapton® KJ.

Kapton® XC is a conductive film and it is custom-made upon request.

Kapton® is DuPont's registered trade mark.

Teflon® is DuPont's registered trade mark.

content-middle-right-slide

content-middle-right-bottom



Λ