Here you will find the latest news from the Dr. Dietrich Müller GmbH

Coiltech

Coiltech in Pordenone

Coiltech is the largest trade show in Italy and the second largest trade show worldwide for electrical insulating materials for the production of electromagnetic coils, electric motors, electrical transformers and much more!Coiltech is from the 23rd to 24th of...


Posted By Category: News ENComments: 0
polyimide film

5 industries that rely on polyimide film

Films play an increasingly important role in the industry. Polyimide film is one of the most popular films because of its special property profile, and is used in a wide range of industries:5 industries are listed below for which...


Posted By Category: News ENComments: 0
Busbar

Insulation films for busbar systems

Ahlhorn | 09.09.2020 The expansion of the charging infrastructure in Germany and the higher performance of electric vehicles present new challenges for manufacturers of conductor rails, charging infrastructure and battery systems. High dielectric strength, partial discharge resistance and small component...


light+building 2022

light+building

In view of the world-wide situation caused by the Corona pandemic, and the prohibitions on events and travel restrictions associated with it, Messe Frankfurt has decided, jointly with its partners – ZVEI and ZVEH – and with the Trade...


Posted By Category: News ENTags: , Comments: 0
transparent polyimide film Flexiso PI FI 16075

All about transparent, colorless polyimide film

Polyimide film is an electrical insulating material with very special properties and can therefore be used in a variety of ways. Polyimide (short: PI) is a thermoplastic synthetic substance for high-temperature applications.Polyimide foil is dimensionally stable, has a very...


polyimidfolie

15 Properties of polyimide film, developers should know about

15 Properties of polyimide film, developers should know about Polyimide films are used in the electrical/electronics industry for their heat resistance, low outgassing, radiation resistance and insulating properties in the form of light-brownish, semi-transparent films. High continuous operating temperatures of...


Sabic

Lexan-films: Die cut parts and formed parts

Dr. D. Müller GmbH is one of the best-known and most specialised converters of Lexan films from Sabic Plastics (formerly GE Plastics). Stamped parts and insulating parts belong to the speciality of the company. Property profile of the Lexan films Lexan...


Digital Fabricator - Dr. Dietrich Müller GmbH

3D printing continues to revolutionize the industry

In 3D printing, material is applied layer by layer under computer control, so that three-dimensional structures or objects are created. The material can be applied from several liquid or solid materials according to given dimensions and shapes. The form...


Dr Dietrich Müller GmbH

ABS film: Suitable for a variety of applications

Acrylonitrile-butadiene-styrene (ABS) is now an everyday plastic that is widely used because of its surface hardness, high impact resistance and good resistance to weathering, aging and chemicals: for example, as a deep-drawn part for housings of household and electrical...


Posted By Category: News ENTags: , , Comments: 0
Dr Dietrich Müller GmbH

insulation materials for electric motors and thermally conductive films for batteries

For e-mobility: insulating materials for the electric motors and thermally conductive films for the batteriesThe topic of electromobility poses a multitude of challenges for the manufacturers of trucks and motor vehicles. Insulation materials and thermally conductive materials from Dr....


Dr. Dietrich Müller GmbH

High flexibility even in crisis situations

Ahlhorn | 26.05.2020 With the production of visors and breathing masks, Dr Dietrich Müller GmbH demonstrates a high degree of flexibility in the pandemic. In addition to visors, sufficient respirator production is necessary to ensure protective measures for the own population,...


Posted By Category: News ENTags: , Comments: 0
Sabic

New ECO-FR films from Sabic available

Ahlhorn | 11.11.2013 Dr. Dietrich Müller GmbH also supplies the new ECO FR films from Sabic. These environmentally friendly, UL-compliant, translucent or opaque films are bromine- and chlorine-free and offer flame-retardant performance in various thicknesses. This allows OEMs of electrical/electronic products...


Posted By Category: News ENTags: , , , Comments: 0
Polyimide film PI FI 16000

Polyimide films: Extension of the product range

Dr. Dietrich Müller GmbH, a leading supplier of electrical insulation materials, thermal conduction products, gaskets and technical films, has extensively expanded its range of polyimide films. Larger thickness range of polyimide films Polyimide films, which were previously available as standard in...


Visier

Films for face visors: Tecfilm PC TC 00110 is suitable

Dr. Dietrich Müller GmbH  | 2.05.2020 The film Tecfilm PC TC 00110 an ideal film for the production of face shields Dr. Dietrich Müller GmbH from Ahlhorn is a recognized specialist for Development, production and further processing of technical films.In 2018...


Posted By Category: News ENTags: , Comments: 0
Dr Dietrich Müller GmbH

PEEK: A high-performance thermoplastic for special applications

Dr. Dietrich Müller GmbH | 30.03.2020 Precision turned and milled parts made of the high-performance plastic PEEK (polyetheretherketone) are used in many areas, for example as gears, pistons and much more. Ahlhorn, 30.03.2020 - The high-performance plastic polyether ether ketone at...


Posted By Category: News ENTags: , , , Comments: 0
Sonophan

Sonophan PEI film available

Sonophan Sonophan PEI is heat resistant, inherently flame retardant, self-extinguishing and electrically insulating.Heat-resistant, inherently flame-retardant, self-extinguishing and electrically insulating is the PEI film Sonophan PEI from Dr. Dietrich Müller GmbH from Ahlhorn in Lower Saxony. It is based on polyetherimide...


elektronik

Thermigrease: thermally conductive grease made in Ahlhorn

Thermigrease: thermally conductive grease made in Ahlhorn: Thermigrease TG 20055 The product Thermigrease TG 20055 was developed for high-end applications, the Thermigrease TG 20050 was developed for demanding industrial applications.Dr. Dietrich Müller GmbH, a leading supplier of electrical insulation materials,...


polyoxymethlen

Polyoxymethylenes – resistant and versatile

Dr. Dietrich Müller GmbH | 19.02.2020 Plastics processing is an important branch of industry and is irreplaceable as a supplier in many sectors. Knowledge of the properties of the most important plastics is essential. Ahlhorn, 19.02.2020 - What is POM -...


Posted By Category: News ENTags: , Comments: 0
hochbeet

Raised beds made of pallet frames – A real garden trend

Dr. Dietrich Müller GmbH |  22.02.2020 Pallet frame raised beds are a real feast for the eyes in the garden and are also back and knee friendly. Raised beds, which are built with pallet frames, are a real feast for the...


Posted By Category: News ENTags: Comments: 0
Polyethylen

Polyethylene (PE) – 3 variants: PE300, PE500 and PE1000

Dr. Dietrich Müller GmbH | 20.01.2020 Polyethylene (PE) is a popular material with a wide range of applications. However, depending on the intended use, care should be taken to select the most suitable variant. Ahlhorn, 20.01.2020 - Kunststoffhaus offers polyethylene (PE)...


Posted By Category: News ENTags: Comments: 0
Peek

PEEK in medical technology

Dr. Dietrich Müller GmbH, 16 December 2019 The term PEEK is used to describe plastics with outstanding thermoplastic properties that are increasingly being used in medical technology, e.g. in dentistry. Ahlhorn, 16.12.2019 - Polyetheretherketone for medical applications Plastics are among the materials...


Posted By Category: News ENTags: , Comments: 0
Valox-Folie

Diffuser foil for LED applications: Makrofol, lexan film and polyester film

Dr. Dietrich Müller GmbH | 11.12.2019 Makrofol, Lexan film and polyester film are used as diffuser film. Dr. D. Müller GmbH supplies a wide range of diffuser films for LED applications. Makrofol films, Lexan films and polyester films are used and...


Posted By Category: News ENTags: , , Comments: 0
Pertinax-Rohre

Configure and order Pertinax tubes online

Dietrich Müller GmbH, November 25, 2019 Dr. Dietrich Müller GmbH, brand and recipe owner of the Pertinax brand, offers its customers the possibility to configure and order tubes made of Pertinax online. Dr. Dietrich Müller GmbH, the owner of the trademark...


Posted By Category: News ENTags: , Comments: 0
PAR-CNC-Frästeile

PAR – Polyarylate, a polymer with versatile properties

Dr. Dietrich Müller GmbH | 23.11.2019 Our modern life, indeed our modern world would be unimaginable without plastic. It is fascinating what different properties different plastics have, such as polyarylate (PAR) Ahlhorn, 22.11.2019 - The properties of PAR polyarylate Polyarylate is by...


Posted By Category: News ENTags: , , , Comments: 0
ultem-1000-polyetherimid-3d-druck-folie-abm-und-farbe-waehlbar

Dr. Müller at the 3D printing trade fair Formnext on the subject of continuous printing plates

Dr. Dietrich Müller GmbH | November 21, 2019 Dr. Dietrich Müller GmbH had good discussions about permanent printing plates made of Pertinax and Ultem at the Formnext trade fair, which was held for the fifth time.The formnext fair in Frankfurt...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller GmbH

Battery separator films: Contract cutting also possible here

Dr. Dietrich Müller GmbH, | 12.11.2019 Dr. Dietrich Müller GmbH also cuts battery separator films on a contract basis at the Ahlhorn and Durmersheim sites. Everything about contract cutting: Paper, films and fleece are processed according to customer requirementsThe experienced professionals also...


Posted By Category: News ENTags: , Comments: 0
Gestanzte Teile aus Klebebändern

Die-cut parts from adhesive tapes

Dr. Dietrich Müller GmbH | 09.11.2019Punched parts from adhesive tapes make sense for large production quantities, as they offer great time savings.Dr. Dietrich Müller GmbH produces labels, die-cut parts and adhesive tapes for industrial customers. These include mechanical engineers...


Posted By Category: News ENTags: , Comments: 0
3D Formteile

Ultem films as 3D printing material

Dr. Dietrich Müller GmbH | 10.08.2019 Ultem film is ideal as a printing plate for 3D printing The company Dr. Müller GmbH, supplier of electrical insulating materials, heat conducting products and gaskets, with its headquarters in Ahlhorn, continues to be active...


Posted By Category: News ENTags: , , Comments: 0
Valox-Folie

12 properties of Valox, developers should know

12 properties, that developers, who are involved in the use of Valox films for the insulation of lighting fixtures, memory drives, power supplies, bus bars, TV and other displays, PC cards and office machines, and the manufacture of laminated...


Posted By Category: News ENTags: , Comments: 0
CWIEME

CWIEME 2019: again present

International Fair Coil Winding, Insulation & Electrical Manufacturing Once again Dr. Dietrich Müller GmbH is exhibiting at the international trade fair Coil Winding, Insulation & Electrical Manufacturing, which takes place in Berlin from 21.05-23.05.2019.Also this year Dr. Dietrich Müller GmbH...


Posted By Category: News ENTags: , Comments: 0
Pertinax

3D parts made of Pertinax

Pertinax made to measure The Dr. Dietrich Müller GmbH offers the possibility to enter and order cutting dimensions for Pertinax under www.muellerbestellung.de.The material Pertinax is popular: 3D printers use it - with a self-adhesive finish - as a printing bed...


Posted By Category: News ENTags: Comments: 0
Lofo High Tech Film GmbH

Acquisition of the trademark rights of Lofo High Tech Film GmbH

Dr. Dietrich Müller GmbH, processor of films for the electrical and electronics industry, has acquired the trademark rights of the insolvent Lofo High Tech Film GmbH. These include the brands "Aryphan", "Pokalon", "Sonophan" and "Tacphan". The product range previously...


Dr. Dietrich Müller GmbH

Online shop www.muellerbestellung.de is available

Ahlhorn | 25.07.2017 Various materials such as Pertinax, Rigidiso, Thermigrease can be ordered online at www.muellerbestellung.de. Due to the need to offer its customers the possibility to receive small quantities for samples and prototypes quickly and easily, Dr. Dietrich Müller GmbH...


Posted By Category: News ENComments: 0
Dr. Dietrich Müller GmbH

Electrical industry expects production to grow by 1.5 percent in 2017

Berlin | 04.02.2017 The German electrical industry expects stable growth to continue in 2017. From an economic point of view, the electrical and electronic industry is the second largest industry in Germany with approx. 850,000 employees. At 43%, it also has...


Posted By Category: News ENTags: , Comments: 0
ICE Europe

Dr. Müller satisfied with the response to the ICE-X 2017

Ahlhorn | München, 25.03.2017 Dr. Müller satisfied with the response to the ICE-X 2017 Dr. Dietrich Müller GmbH from Ahlhorn in Lower Saxony is satisfied with the results of the ICE-X trade fair in Munich, which took place from 21 to...


Posted By Category: News ENTags: , , Comments: 0
Für jede Anforderung das passende Material

High temperature resistant labels for the most demanding applications

Alpine horn | 05.02.2017 Dr. Dietrich Müller GmbH has developed a new high temperature resistant label material based on a white coated polyimide film.   The adhesive system is a permanent, age-resistant acrylic adhesive.   This new material is an...


Posted By Category: News ENTags: , , Comments: 0
Coposites Europe

Positive balance sheet for Composites Europe 2016

Düsseldorf | Ahlhorn | 03.12.2016 For the first time, Dr. Dietrich Müller GmbH from Ahlhorn in Lower Saxony took part in Composites Europe in Düsseldorf. The company presented its comprehensive product and service portfolio in the field of machining and...


Posted By Category: News ENTags: , , Comments: 0
Frästeil aus Trafoholz

Processing of transformer wood

Ahlhorn | 04.11.2016 Rigidiso-Trafoholz is produced from high quality impregnated beech veneers of 0.5 to 1.5 mm veneer thickness and is then further processed on our CNC machining centres. Rigidiso-Trafoholz Rigidiso-Trafoholz is produced from high quality impregnated beech veneers with a veneer...


Polar

For those who want to do well: Contract cutting at Müller Ahlhorn

Ahlhorn | Rastatt | 24.10.2016 Anyone who associates paper or films with contract cutting is in good hands with the experienced Dr. Dietrich Müller GmbH. On February 1, 2016, a new branch was opened in Rastatt, Germany, expanding the extensive...


Posted By Category: News ENTags: Comments: 0