Here you will find the latest news from the Dr. Dietrich Müller GmbH

Exhibition stand Dr Dietrich Müller GmbH

UK Advanced Engineering 2011 | NEC Birmingham UK | A good response from attendees

Ahlhorn | Birmingham | 16.11.2011 The companies Dr. Dietrich Mueller UK Ltd & Dr. Dietrich Müller GmbH have been presented together for the first time at this year's “Advanced Engineering UK 2011” group of events. During this exhibition, which took place...


Dr. Dietrich Müller at the exhibition at the NEC Birmingham UK: Premiere at the Advanced Engineering UK 2011

Exhibition | NEC Birmingham UK: Premiere at the Advanced Engineering UK 2011

Ahlhorn | Birmingham | 07.11.2011 Dr. Dietrich Müller GmbH together with its distribution and production company Dr. Dietrich Müller (UK) Ltd. will be attending on 9 - 10 November at the Advanced Engineering UK 2011 in Birmingham UK, England. This show,...


Posted By Category: News ENTags: , , , Comments: 0
Clean Energy Expo Asia 2011

Clean Energy Expo Asia 2011

Ahlhorn | Singapore | 28.10.2011 The Clean Energy Expo Asia 2011 will be completely dedicated to the areas of renewable energy, energy efficiency and sustainable mobility solutions from the 1st to the 3rd November, 2011 atthe Suntec International Convention and...


Posted By Category: News ENTags: Comments: 0
Mobile Display - Dr. Dietrich Müller GmbH: Contract 4S iPhone protectors

Contract 4S iPhone protectors

Ahlhorn | 04.10.2011 Dr. Dietrich Müller GmbH, a supplier of insulating materials and technical films for the electrical industries, has today announced that the company has received an order to produce protective films for the iPhone 4S. These protective films will...


Posted By Category: News ENTags: , Comments: 0
COMPOSITES EUROPE 2011: New exhibitor record, winning innovations

COMPOSITES EUROPE 2011: New exhibitor record, winning innovations

Ahlhorn | Stuttgart | 30.09.2011 25 per cent more exhibition space, 20 per cent growth in the number of exhibitors, including many global players in the fields of CRP and Engineering: The trade fair COMPOSITES EUROPE was held with over...


Posted By Category: News ENTags: , , Comments: 0
Coiltech 2011

Coiltech 2011

Ahlhorn | Pordenone | 28.09.2011 Coiltech 2011 - North Alpe Adria in Pordenone, is Italy's first exhibition specifically for the electric motor and transformer industry. On display will be equipment and materials for the manufacture and repair of electrical machines and...


Posted By Category: News ENTags: , Comments: 0
The 30th Motek 2011 and the 5th Bond Expo

The 30th Motek 2011 and the 5th Bond Expo

Ahlhorn | Stuttgart | 27.09.2011 The 30. MOTEK 2011 and the 5th Bondexpo, will be held from the 10th to the 13th of October at the Stuttgart Exhibition Centre. This leading event for Assembly and Handling Technology, and Automation, is...


Posted By Category: News ENTags: , , , , Comments: 0
IAA 2011

IAA 2011

Ahlhorn | Frankfurt | 21.09.2011 The 64th Edition of the IAA, the largest automobile exhibition in the world, takes place in Frankfurt from 15th to 25th September. At the IAA in Frankfurt many of the leading automobile manufacturers were presenting...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller at the 1st International Electric Drives Production Conference

Exhibit at the 1st International Electric Drives Production Conference

Ahlhorn | Nürnberg | 29.09.2011 Electric drives, one of the most important future technologies was the focus of a meeting that took place from 27th to 30th September at the Friedrich-Alexander University Erlangen-Nuremberg. At the 1st International Conference Production Electric...


Posted By Category: News ENTags: , , Comments: 0
E info

Report about ArpaxX-Aramidpaper

Ahlhorn | 16.09.2011 The trade journal "ELinfo ELEKTRONIK INFORMATIONEN" reports in its September issue under the heading "Aramid paper - new product generation with improved properties" about our newly developed premium aramid paper. In addition to the technical properties of the...


Posted By Category: News ENTags: , Comments: 0
Report - ArpaxX-Aramid Paper

Report – ArpaxX-Aramid Paper

Ahlhorn | 16.09.2011 The journal "ELinfo ELECTRONIC INFORMATION" reported in the September issue under the heading “Aramid Paper - New generation of products with improved properties" on our newly-developed Premium Aramid Paper. Particular attention is paid on the new technical...


Posted By Category: News ENTags: , Comments: 0
Dr. Dietrich Müller: Norton TH for a variety of applications in the electrical engineering sector

Norton TH for a variety of applications in the electrical engineering sector

Ahlhorn | 16.09.2011 The High Performance Material Norton TH is suitable for a variety of applications in the electrical engineering field: the product can be used as slot insulations and wedges in traction motors, as an intermediate layer in transformers...


Posted By Category: News ENTags: , Comments: 0
Composite Europe

Composites Europe 2011

Ahlhorn | Stuttgart | 13.09.2011 The 6th European Trade Fair for Composite Materials, Technology and Applications, will take place from 27 to 29 September 2011 at the Stuttgart Exhibition Centre. COMPOSITES EUROPE is the summit meeting of the composites industries...


Posted By Category: News ENTags: , , Comments: 0
LABELEXPO EUROPE 2011

LABELEXPO EUROPE 2011

Ahlhorn | Brussels | 13.09.2011 The worldwide graphic show, specifically focused to the production of self adhesive labels, LABELEXPO EUROPE 2011 (www.labelexpo-europe.com) that will be held in Brussels (Belgium) from September 28th to October 1st. Many machine manufacturers, material manufacturers...


Posted By Category: News ENTags: , Comments: 0
Bern is the Mecca of public transport

Bern is the Mecca of public transport

Ahlhorn | 05.09.2011 During the four days of meetings of 6 - 9 September 2011 in the halls of the AG BERN EXPO and the new tram depot BERNMOBIL, specialists from across Europe come to exhibit "suissetraffic". Around 170 companies on...


Posted By Category: News ENTags: , , , Comments: 0
Dr. Dietrich Müller GmbH: Germany with great opportunities in the field of electric cars.

Germany with great opportunities in the field of electric cars.

Ahlhorn | 31.08.2011 According to a report in the Nordwest-Zeitung 30.08.2011, a newspaper from Oldenburg Germany, electric cars will create the breakthrough to the mass market by 2022, and German manufacturers will be, in the opinion of 300 European senior...


Dr. Dietrich Müller GmbH: Stamped parts from Valox for the lighting industry

Stamped parts from Valox for the lighting industry

Ahlhorn | 09.08.2011 In addition to the conventional films for electrical insulation, such as Mylar, Nomex, ArpaxX, Hostaphan and Lexan, Dr. Dietrich Müller GmbH also processes Valox film from the company Sabic to stamp parts for the lighting industry. Valox® FR-1...


Posted By Category: News ENTags: , , Comments: 0
ArpaxX with UL 94 - VO

ArpaxX with UL 94 – VO

Developed by Dr. Dietrich Müller GmbH, ArpaxX aramid paper meets the standard UL 94-V0, this was originally developed in the U.S. for the testing of plastics for electrical devices. V0 means self-extinguishing within 10 seconds, although burning drops are not...


Posted By Category: News ENTags: , Comments: 0
Exhibition setup Dr Dietrich Müller GmbH

ArpaxX Aramid paper

ArpaxX – push up the heat Nothing is so good that it can not be further improved and optimized. The ArpaxX series brings Dr. Dietrich Müller GmbH a completely new generation of premium Aramid Paper on the market that sets...


Posted By Category: News ENTags: , Comments: 0
APTIV films as a new high performance materials available

APTIV films as a new high performance materials available

Ahlhorn | Hofheim | 24.06.2011 Victrex APTIV® films provide all of the outstanding properties of VICTREX PEEK polymer in a thin film format. Manufactured to exacting quality standards on state-of the -art equipment, APTIV films provide a balance of properties...


Posted By Category: News ENTags: , Comments: 0
Exhibition stand

ArpaxX – push up the heat

Ahlhorn | 5,24,2011 By ArpaxX series;Dr. Dietrich Müller GmbH brings a whole new generation of premium-aramid on the market. ArpaxX – push up the heat Nothing is so good that it can not be further improved and optimized. The ArpaxX series brings...


Posted By Category: News ENTags: , Comments: 0
Lectures at the CWIEME Berlin 2011

Lectures at the CWIEME Berlin 2011

Ahlhorn | Berlin | 20.05.2011 We are delighted to invite you to our two lectures which will be held at the largest exhibition for Coil Winding and Electrical Insulation, CWIEME Berlin 2011. We are delighted to invite you to our two...


UL-Seminar: Produkthaftung in den USA

UL seminar: Product liability in the USA

Ahlhorn | USA | 05.05.2011 Underwriters Laboratories is offering a seminar on 16.06.2011 in Neu-Isenburg with the title "Product liability in the USA for manufacturers of electrical and electronic devices" UL will hold the seminar in German language. Please register directly with...


Posted By Category: News ENTags: Comments: 0
CWIEME Berlin 2011: Dr. Dietrich Müller GmbH with a large product range

CWIEME Berlin 2011: a large product range

Ahlhorn | 29.04.2011 From 24th to 26th May the company Dr. Dietrich Müller GmbH will be exhibiting for the 13th time at this year’s CWIEME Berlin 2011, which is accepted as the world’s largest exhibition for Coil Winding and Electrical...


Posted By Category: News ENTags: , , , Comments: 0
FIEE ELÉTRICA 2011: Dr. Dietrich Müller GmbH & Dr. Dietrich Müller do Brasil Ltda

FIEE ELÉTRICA 2011

Ahlhorn | 22.3.2011 The companies Dr. Dietrich Müller GmbH and Dr. Dietrich Müller do Brasil Ltda will participate together at the two great inter-related shows FIEE ELÉTRICA and Electronicamericas, which is considered as the main event leader in Latin America,...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller: Punched parts made ​​of 3M VHB Tapes

Punched parts made ​​of 3M VHB Tapes

Ahlhorn | 16.03.2011 As well as a range of punched and moulded parts made from non-adhesive materials, such as Nomex®, Mylar®, Hostaphan® and Pertinax®, Dr. Dietrich Müller GmbH (Ahlhorn) also manufactures punched parts with adhesive materials. They consist of a...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller: Nomex ® parts in self-adhesive version.

Nomex parts in self-adhesive version.

Ahlhorn | 04.03.2011 Stamped and moulded parts of the DuPont Nomex® aramid paper of the types 410, 411 and 414 are used in many areas of the electrical and electronic industries. The paper is installed in enclosures or used as insulation...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller GmbH at CoilTechnica in Hannover.

CoilTechnica in Hannover.

Ahlhorn | Hannover | 23.02.2011 Dr. Dietrich Müller GmbH, a leading supplier of electrical insulating materials made of flexible and rigid materials, will take part this year in the leading trade show CoilTechnica, which will be held from 4th to...


Posted By Category: News ENTags: , , Comments: 0
Stanzteile aus Formex- und Statex-Folien

Stamped parts from Formex and Statex films

Ahlhorn | 26.01.2011 Dr. Dietrich Müller GmbH has expanded its range of materials to include Formex and Statex films from ITW Formex. Dr. Dietrich Müller GmbH, a leading converter of electrical insulation materials, heat conducting products, gaskets and technical films, has...


Posted By Category: News ENTags: , , , Comments: 0
ArpaxX with UL 94 - VO

UL-registered Repacked-Recognized Company

Ahlhorn | 12.10.2010 Dr. Dietrich Müller GmbH has been registered as a Repackaged - Recognized Company at UL, after COMPONENT - REPACKAGED RECOGNIZED COMPONENTS of the category (TEOU2). The company has been registered under the UL file number E341377 and thus...


Posted By Category: News ENTags: , , Comments: 0
Formstanzteile aus Klebebändern

Die-cut parts from adhesive tapes

Ahlhorn | 10.11.2010 Dr. Dietrich Müller GmbH supplies a wide range of punched and formed parts made of adhesive tapes for various branches of industry. We process adhesive tapes with the following processing techniques, among other things, into insulating parts: Cutting Blank for...


Polyimidfolie

Die-cut parts from adhesive tapes

Polyimide film, adhesive Punched parts from adhesive tapes make sense for large production quantities, as they offer great time savings. Dr. Dietrich Müller GmbH produces labels, die-cut parts and adhesive tapes for industrial customers. These include mechanical engineers as well as...


Posted By Category: News ENTags: , Comments: 0
Dr. Dietrich Müller registered as a UL – „Repackaged Recognized Components“ Company.

UL – „Repackaged Recognized Components“ Company

Ahlhorn | 12.10.2010 The company Dr. Dietrich Müller GmbH is registered with UL under the category name „Repackaged Recognized Components“ code TEOU2. The company is registered under the UL File Number E341377, which determines that the company meets the UL...


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Secondary processes

Secondary processes Victrex APTIV film facilitates a wide range of secondary processes which allow designers and engineers to obtain the performance properties of APTIV film in a variety of forms. In addition to in-house capabilities, which include prototype-scale thermoforming and...


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Properties

Moisture Uptake Under general atmospheric conditions of 50% relative humidity (RH), APTIV 1000 film shows low moisture absorption. As a result APTIV 1000 film exhibits stable mechanical, dielectric and dimensional properties. Tensile Modulus APTIV 1000 film has excellent tensile modulus. Further enhanced...


Posted By Category: News ENTags: , Comments: 0
Dr Dietrich Müller GmbH

Film grades

APTIV film grades APTIV film is available in several grades according to the specific needs of the end use application. Within each grade a broad range of thicknesses are available from 6 to 750 microns (0.25 to 30 mils). The standard width of...


Posted By Category: News ENTags: , , Comments: 0
Dr Dietrich Müller GmbH

Key Features

High Heat Resistance APTIV film has a RTI rating of 220°C (428°F) for mechanical use without impact and 200°C (392°F) for electrical use for 25–125 micron films, and is capable of withstanding lead-free solder processing temperatures of up to 300°C (572°F). Excellent Wear...


Posted By Category: News ENTags: , Comments: 0