Key Features

APTIV slide with higher Heat resistance has an RTI value of 220°C (428°F) for mechanical use without
shock and 200°C (392°F) for electrical use for 25-125 micron foil and is
able to withstand lead-free soldering process temperatures up to 300°C (572°F).

Excellent wear properties

Naturally lubricious, it has a very smooth surface and few particles. The limiting printing speed Lpv is 145 MPa.m/min (69.000 psi.ft/min) without the need for lubricants.

Low moisture absorption

Resists moisture that can affect the electrical, dimensional, and mechanical properties of other materials.

Clarity

Exceptionally low outgassing and extractables.

Excellent acoustic properties

Excellent response, low distortion, high internal damping, low ringing.

Broad chemical resistance

Insoluble in all common solvents. Excellent resistance to acids, oxidants, hydrocarbons, salts and steam. Superior chemical resistance than many exotic metals.
Properties unaffected by exposure to steam at 200°C (392°F) after
2.000 hours.

Low smoke and toxic gas emissions

Good flame resistance without the use of flame retardant additives and low toxicity of the fire gases. Inherently halogen free according to IEC 61249-2-21.

environmentally friendly

Lightweight, recyclable, halogen-free, withstands lead-free soldering process temperatures, and is RoHS compliant.

High strength and toughness

Highest stiffness and resistance to cyclic fatigue of any thermoplastic. Strength is well maintained above the glass transition temperature (Tg). Excellent tear resistance, puncture resistance and acoustic fatigue properties.

electrical stability

Very stable dielectric properties over a wide temperature, frequency and humidity range.

FDA certified for food contact

The APTIV film qualities 1000, 1100, 1300, 2000 and 2100 can
safe to use with repeated contact with food. They meet the compositional requirements of FDA 21 CFR 177.2415, Commission Directives 1935/2004/EC and 2002/72/EC and amendments to 2005/79/EC.