Subscribe to our newsletter.



Discover now our wide-ranged job offers and have a carreer at Dr. Dietrich Müller. We are looking for:

  • Wholesale and Foreign Trader
  • Graduated in Electrical Engineer


PCIM Europe Nuremberg 2015

Thermally conductive pad: Thermipad TP 22715 with 15 W/mK

SPIE Smart Structures/NDE conference

Electronics & Components Hong Kong

Imports and exports of the electrical industry


InnoTrans Berlin

World Energy Engineering Congress Washington

Enova Paris

International Electric & Automation Show Bucharest

CFRP profiles

Energie Impulse Aachen

Water-jet cutting

 CWIEME in Berlin 2013

Coil Winding 2013

Thermiglue TL 23010

Coil Winding 2012

CWIEME Berlin 2012

Italian bobbin manufacturer

Working hours

NEC Birmingham UK

Advanced Engineering UK 2011

Clean Energy Expo Asia 2011

Contract 4S iPhone protectors


Electric Drives Production Conference

MOTEK 2011 and Bondexpo

IAA 2011

Norton TH

ArpaxX-Aramid Paper

Slot insulation material

Bern and public transport

Germany with great opportunities in the field of electric cars

Stamp parts from Valox for the lighting industry

Thermal management for LED – Applications

APTIV films are available as a new high performance materials

ArpaxX - push up the heat: Dr. Dietrich Müller GmbH

ZVEI: The Electrical Industry expects that the boom will continue in 2012

Lectures at the CWIEME Berlin 2011

CWIEME Berlin 2011: Dr. Dietrich Müller GmbH with a large product range

Increased Growth Forecast for the German Electrical Industry

Hannover Messe CoilTechnica:  A Good and Positive Response for Dr. Dietrich Müller

Delivery situation in Japan

FIEE: A resounding success for Dr. Dietrich Müller


Dr. Dietrich Müller: Punched parts made ​​of 3M VHB Tape

Dr. Dietrich Müller: Nomex® parts in self-adhesive version.

Dr. Müller GmbH CoilTechnica, Hannover.

MT in different varieties and Thermiflex

Dr. Müller GmbH: New product for the solar industry

Dr. Dietrich Müller registered as a UL – „Repackaged Recognized Components“ Company.

CWIEME Berlin 2010: Dr. Mueller in Ahlhorn

Dr. Mueller: High technology and innovation at one time in one venue

Dr. Müller GmbH continues its leadership as a supplier of Ultem films

Dr. Müller GmbH: New product line for films release

Dr. Müller proud of the opening of the Germany's first offshore wind park

Müller and Temac: Distribution agreement sealing materials

Get involved with the latest insulation product offerings at the Coil Winding 2010 – Dr. Müller GmbH


Direct request:

Enquiries from the United Kingdom:

Dr. Dietrich Mueller UK Limited

Tel    +44 7549 834830
Fax   +44 2476 996466


Enquiries from all other countries:

Tel: +49 4435 971010
Fax: +49 4435 971011

Let us know, which product you are
looking for and we will give you the
adress of the right distributor.



Electronics Industry

The electronics industry is an important market sector for the company Dr. Dietrich Müller GmbH. Our products are used in many areas.

Stamped and formed parts as housing insulation

We manufacture pre-finished housing insulation parts from our large selection of electric insulating materials. These stamped parts can be supplied either with self-adhesive over the entire surface or partially.

Adhesive tapes and die-cut parts as covering in the manufacture of printed circuit boards   

polyimide adhesive tapes are made to cover during wave soldering, stamped parts are produced in various forms.

Marking applications

Dr. Dietrich Müller GmbH´s high-temperature adhesives and films are used for labels, which also must resist extreme temperatures. For this purpose, , PEI or Aptiv films are used.

Cooling applications

The thermally conductive adhesive film as die-cut parts connect permanently with heat sinks or flexible circuits. The adhesive film is characterized by a high immediate adhesion and provides good electrical insulation properties as well as a high thermal conductivity. Besides this there is a wide range of thermally conductive pastes, thermally conductive films, thermally conductive pads and thermally conductive adhesives

Applications of splice tapes and tape connectors in pick and place machines

Tape connectors and splice tapes create a precise and secure connection of SMD tapes in pick and place machines. Production shutdowns and component losses are caused by inefficient connecting of SMD tapes and the component tapes. Our products prevent downtime through precise methods of the bonding of the tapes to each other.

Double Splice Tape as Tape Connectors for SMD – Tapes

  • Radial Tape Connectors
  • SMD - Splicing
  • TapeCover
  • Taper Extenders
  • Tape Caps
  • Splice Sheets

Spacer films for keyboard manufacture
One important sector in the electronic industry is the spacer film as a self-adhesive film for film keyboards.

The basic material consists of polyester carriers with acrylate adhesives in different thicknesses.

We manufacture individual die-cut parts in precision. We can manufacture them as rolled goods or single components, with or without peel-open tap.

Spacer films can also be delivered continuously as rolled goods in different width.

Laser cut former-plates
For manufacturing former plates different materials especially polyester films are laser cut.

Protection films made of Lupolen HX 1817
We deliver die-cut parts made of LD-PE-films Lupolen HX 1817 as protections films for electronics.

The company Dr D. Mueller GmbH uses the following materials for the manufacture of products: