Supplier to the Queen - the Queen of England also relies on tailor-made seals from Dr. Dietrich Mueller GmbH.
Represented everywhere - the ICEs of the Deutsche Bahn also rely on tailor-made Nomex® parts from the company Dr. Dietrich Mueller GmbH.
Convert electricity and insulate perfectly, thanks to insulating materials from Dr. Dietrich Mueller GmbH.
Electricity converted into movement and optimally insulated, the tapes and insulating materials of the Dr. Dietrich Müller GmbH have also proven themselves in the electric motor sector.
Traveling fast and yet everything remains insulated - the Transrapid in Shanghai also relies on tailor-made insulating parts from Dr. Dietrich Mueller GmbH.
Supplier to the Queen - the Queen of England also relies on tailor-made seals from Dr. Dietrich Mueller GmbH
Cable. Optimally insulated. Thanks to insulating films from DR. Dietrich Müller GmbH
technology for medicine. Films from Ahlhorn are also used here.
The golf. The car. And the trust in thermally conductive pastes from Dietrich Müller GmbH.
Versatile and can be found almost everywhere - the technical foils of the Dr. Dietrich Müller GmbH, for example, for fuel cells.
Convert electricity and insulate perfectly, thanks to insulating materials from Dr. Dietrich Mueller GmbH.
Previous slide
Next slide

Direct request:

Sales kits and parts
for transformers

Sales tapes, slot insulation,
Cover slide, phase isolation

for electric motors and generators

Phone: +49 (0) 4435 97 10 10
Fax: +49 (0) 4435 97 10 11

E-Mail: info@mueller-ahlhorn.com

Sales of insulating and thermally conductive foils,
Thermal paste, hoses, adhesive tapes

for the electronics

Phone: +49 (0) 4435 97 10 10
Fax: +49 (0) 4435 97 10 11

E-Mail: info@mueller-ahlhorn.com

Sales composites
laminates, CNC parts,
GRP pipes + profiles, coiled pipes

Phone: +49 (0) 4435 97 10 318
Fax: +49 (0) 4435 97 10 11

E-Mail: info@mueller-ahlhorn.com

Inquiries from Great Britain:

dr Dietrich Mueller UK Limited
Tel: 44 20 80894197
Fax: + 44 20 80894198

Email: info.uk@mueller-ahlhorn.com

Inquiries from all other countries:

Tel: 49 4435 971010
Fax: +49 4435 971011

Email: info@mueller-ahlhorn.com

Tell us what product you are looking for and we will give you the address of the right dealer in your country.

stampings

Punched parts or stamped parts

The punching production area is one of the larger product areas of Dr. Dietrich Mueller GmbH.

Punched parts are manufactured according to samples or drawings. Punched parts can be made with adhesive on one or both sides.

Delivery forms of stamped parts

Punched parts are poured loose, stored in magazines and delivered on rolls.

If punched parts are to be delivered in bulk, they are usually shrink-wrapped in PE bags and then packed in cartons. Stamped parts are packed in PE bags to protect them from moisture and dirt. Loosely dumped punched parts are often fed into production with vibration conveyors.

Stamped parts in magazines

All punched parts can be magazined. The stamped parts are packed in specially made magazines so that they can be processed automatically in our customers' production facilities. Punched parts that are stored in magazines can also be delivered shrink-wrapped in PE foil. The magazines with the punched parts are packed in boxes.

Stamped parts on rolls

Stamped parts can also be supplied in roll form. These punched parts can then be fed in automatically. Stampings in roll form can be supplied adhesive and non-adhesive. These punched parts are also packed in PE bags. The rolls with the die-cut parts are then shipped in a box.

Tool technology for stamped parts

We manufacture stamped parts with three different tool technologies. Steel bar stamping is used to produce stamped parts up to 50.000 parts. Larger quantities are mainly manufactured with solid tools. Stamped parts that are supplied on rolls are mainly produced with rotary tools. Mass stamped parts are only produced with stamping tools. These dies for stamping parts are serviced by our company.

Wage work by Sdance sharing
We also provide this service as wage work .

Materials for Stampings

Almost all of our materials can be punched. So you can not only buy the materials from us, but also buy the finished part directly.

the dr D. Müller GmbH offers the following punching techniques:
– rotary die cutting
– Line punching
– Large area punching

Inquiries from everyone else about countries:
Tel: 49 4435 971010
Fax: +49 4435 971011
E-Mail: info@mueller-ahlhorn.com

Let us know what product you are search and we will give you the Address of the right sales partner.

Direct request:
Inquiries from Great Britain:
dr Dietrich Mueller UK Limited
Tel: 44 20 80894197
Fax: + 44 20 80894198

E-Mail: info.uk@mueller-ahlhorn.com

Get your parts into production today.