in 1 minute.
[mc4wp_form id = “3265 ″]
Discover now our wide-ranged job offers and have a career at Dr. Dietrich Mueller. We are looking for:
Wholesale and Foreign Traders
Graduated in Electrical Engineer.
Inquiries from all other countries:
Tel: 49 4435 971010
Fax: +49 4435 971011
Email: info@mueller-ahlhorn.com
Let us know which product you are
looking for and we will give you the
address of the right distributor.
direct request:
Inquiries from the United Kingdom:
dr Dietrich Mueller UK Limited
Tel: 44 20 80894197
Fax: + 44 20 80894198
Email: info.uk@mueller-ahlhorn.com
PAR polyarylate films
Product | Type | Order no. | thickness (μ) | Temperature ° C | Surface | density in g/ cm3 | punchable | Color | Other | Applications | PDF DE | PDF EN | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tecfilm® | BY | TC 00180 | 10 - 200 | -30 To + 165 | gl | ma | 1,21 | ja | nature | / | insulation of coils, transformers, capacitors, technical adhesive tapes | Download | Download |
Aryphan® | F 685 GL/EM | TC 00181 | 60-200 | -30 To + 165 | gl | ma | 1,21 | ja | colorless | VTM 0 | Download | Download | |
Aryphan® | N 681 E.M | TC 00182 | 10 - 200 | -30 To + 165 | gl | ma | 1,21 | ja | yellow | VTM 0 | Download | Download |
Aryphan® is a registered trademark of Dr. Dietrich Müller GmbH (formerly a trademark of Lofo GmbH)
MAIN PRODUCT FEATURES of Aryphan films
▪ Thickness range: 5 μm – 150 μm
▪ Colors: yellow and colorless
▪ Glass temperature: up to 193 °C
▪ Excellent acoustic properties
▪ Very good mechanical strength
MATERIAL
ARYPHAN ® is made from polyarylate (PAR). Polyarylate is a high-performance plastic with a significantly higher notched impact strength than other amorphous thermoplastics with comparable heat resistance, even at low temperatures. Depending on the manufacturing structure, the foil can be produced with a matt (EM) or glossy (GL) surface. The film is produced in the standard thicknesses of 5 μm to 150 μm, other thicknesses can be offered on request.
MECHANICAL PROPERTIES
ARYPHAN ® has a very high resistance to tearing and tear propagation and is resistant to breakage and splintering. The good mechanical resilience is reflected in the high tear strength and elongation at break. Compared to polycarbonate films, ARYPHAN ® scores particularly well in terms of low-temperature toughness. Due to the manufacturing process, the mechanical properties in the longitudinal and transverse direction are almost identical. ARYPHAN ® is very suitable for deep-drawing.
THERMAL PROPERTIES
ARYPHAN ® has a glass transition temperature of up to 193 °C and has a heat resistance of up to 175 °C (at 1,8 MPa).
OPTICAL CHARACTERISTICS
ARYPHAN ® absorbs light in the near UV range below 360 nm. In the visible light range, transmission increases to around 90%. Most ARYPHAN ® films are matt structured on one side and thus show light refraction.
ELECTRICAL PROPERTIES
ARYPHAN ® has excellent electrical insulating properties. Due to the very low moisture absorption, these are hardly influenced by the moisture content of the material.
CHEMICAL PROPERTIES
ARYPHAN ® is resistant to oils, fats, petrol, aliphatic hydrocarbons and most alcohols. ARYPHAN ® is not resistant to chlorinated hydrocarbons, ketones, aromatic solvents and bases. The film is attacked or dissolved in these substances.
FIRE BEHAVIOR
ARYPHAN ® is already flame retardant due to its molecular structure. Specially equipped types even meet the VTM-0 standard.
WATER ABSORPTION
Due to the low moisture absorption of around 0,2%, the film remains dimensionally stable so that the film properties are hardly affected.
RADIATION RESISTANCE
ARYPHAN ® absorbs light in the near UV range below 360 nm. The film therefore has inherent UV protection and excellent UVC resistance. UV radiation further shifts the UV absorption towards 400 nm, so that the inherent UV protection is even increased. The film will turn slightly yellowish. ARYPHAN ® is also very resistant to beta and gamma radiation.
Further processing of Aryphan
ARYPHAN ® can be deep-drawn and coated using standard high-vacuum processes. The film can be bonded well with the help of selected solvents, solvent-based adhesives and dispersion adhesives, as well as using the hot-melt process.
Stamped parts, tapes and rolls can also be easily manufactured from this polyarylate film.

Aryphan was formerly a trademark of LOFO High Tech Film GmbH and is now a trademark of Dr. Dietrich Mueller GmbH.
in 1 minute.
[mc4wp_form id = “3265 ″]
Discover now our wide-ranged job offers and have a career at Dr. Dietrich Mueller. We are looking for:
Wholesale and Foreign Traders
Graduated in Electrical Engineer.
Inquiries from everyone else about countries:
Tel: 49 4435 971010
Fax: +49 4435 971011
Email: info@mueller-ahlhorn.com
Let us know what product you are search and we will give you the Address of the right sales partner.
Direct request:
Inquiries from Great Britain:
dr Dietrich Mueller UK Limited
Tel: 44 20 80894197
Fax: + 44 20 80894198
Email: info.uk@mueller-ahlhorn.com
More than 1000 engineers worldwide trust our precision components made of flexible and rigid materials.















