in 1 minute.
Discover now our wide-ranged job offers and have a career at Dr. Dietrich Mueller. We are looking for:
Wholesale and Foreign Traders
Graduated in Electrical Engineer.
Direct request:
Sales kits and parts
for transformers
Sales tapes, slot insulation,
Cover slide, phase isolation
for electric motors and generators
Phone: +49 (0) 4435 97 10 10
Fax: +49 (0) 4435 97 10 11
Email: info@mueller-ahlhorn.com
Sales of insulating and thermally conductive foils,
Thermal paste, hoses, adhesive tapes
for the electronics
Phone: +49 (0) 4435 97 10 10
Fax: +49 (0) 4435 97 10 11
Email: info@mueller-ahlhorn.com
Sales composites
laminates, CNC parts,
GRP pipes + profiles, coiled pipes
Phone: +49 (0) 4435 97 10 318
Fax: +49 (0) 4435 97 10 11
Email: info@mueller-ahlhorn.com
Inquiries from Great Britain:
dr Dietrich Mueller UK Limited
Tel: 44 20 80894197
Fax: + 44 20 80894198
Email: info.uk@mueller-ahlhorn.com
Inquiries from all other countries:
Tel: 49 4435 971010
Fax: +49 4435 971011
Email: info@mueller-ahlhorn.com
Tell us what product you are looking for and we will give you the address of the right dealer in your country.
PE polyethylene films
| Product | Type | Order no. | thickness (μ) | Temperature ° C | Surface | density in g/ cm3 | punchable | Color | Other | Applications | PDF DE | PDF EN | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tecfilm® | PELD | TC 00060 | 25-125 | -80...100 | gl | gl | 0,9 | ja | nature | / | slides, packaging container, Laminate | Download | Download |
| Tecfilm® | PEHD | TC 00070 | 25 125 | -40...110 | gl | gl | 0,9 | ja | white | HB | packaging container, Foils, stretched film strips, monofilaments, Laminate | Download | Download |
Tecfilm® is a registered trademark of Dr. Dietrich Mueller GmbH
PE films
Properties of the PE foils
Polyethylene belongs to the polyolefins. Properties of standard polyethylene are: high toughness, very good electrical properties, very low water absorption, low water vapor permeability, high resistance to attack by chemicals, resistance to stress cracking, good processability and workability.
The following 4 types of polyethylene are mainly distinguished:
- PE-LD
- PE HD
- PE MD
- LLDPE
PE-LD: Low Density Polyethylene
Due to the lower density of this polyethylene, it is lighter in weight, but has higher resilience and elasticity. The polyethylene is characterized by a soft, tough and flexible property. The melting point is around 105 °C.
Advantages of PE-LD films:
- High tear strength
- Resistant to acids and bases
- Good weldability and shrinkability
PE-HD: High Density Polyethylene
HDPE has the highest tensile and tear strength and the lowest flexibility and vapor permeability. Due to its increased strength, HDPE is mainly used for thin films. The film has a stiff and crackling feel compared to LDPE. The melting point is around 140 °C.
Advantages of HDPE films:
- Thinner films possible
- High water vapor barrier properties
- More resistant to chemicals and heat than LDPE
- Not suitable for fabrics with a high fat content
PE-MD: Medium Density Polyethylene
MD is manufactured by blending LDPE and HDPE or directly as a copolymer LLDPE, combining the properties of HDPE and LDPE. It has better barrier properties than LDPE, but is more flexible than HDPE. MDPE is softer to the touch than HDPE, but stiffer than LDPE. We do not supply PE-MD films.
PE-LLD: Linear Low Density Polyethylene/ Linear Low Pressure Polyethylene
LLDPE is produced by the polymerisation of ethene and olefins (butene, hexene and octene). The material has excellent stretching and stretching properties and is mainly used for stretch films. We do not supply LLDPE films.
As can already be seen in the manufacturing process, the basic properties of the polyethylene are determined without the effect of possible additives.
The molecular structure is decisive:
- Degree of crystallinity (degree of branching, density)
- Degree of Polymerization
- Mean molar mass
- Molar mass distribution
Copolymerization with vinyl acetate (E/VA) has a greater influence on the properties of PE – especially PE-HD – than mixing polyisobutylene and rubber or PE-LD.
Colors of the PE foils: black, white and transparent
The PE films are supplied in the colors black, white and transparent. Transparent is in stock in different strengths. The white PE film is also in stock in 3 different thicknesses.
Delivery forms of the PE films
We deliver the film in master rolls, already cut into narrow rolls on disc spools or on cross-wound spools, as a blank or as a stamped part.
in 1 minute.
[mc4wp_form id = “3265 ″]
Discover now our wide-ranged job offers and have a career at Dr. Dietrich Mueller. We are looking for:
Wholesale and Foreign Traders
Graduated in Electrical Engineer.
Inquiries from everyone else about countries:
Tel: 49 4435 971010
Fax: +49 4435 971011
Email: info@mueller-ahlhorn.com
Let us know what product you are search and we will give you the Address of the right sales partner.
Direct request:
Inquiries from Great Britain:
dr Dietrich Mueller UK Limited
Tel: 44 20 80894197
Fax: + 44 20 80894198
Email: info.uk@mueller-ahlhorn.com
More than 1000 engineers worldwide trust our precision components made of flexible and rigid materials.
