Subscribe to our newsletter.



Discover now our wide-ranged job offers and have a carreer at Dr. Dietrich Müller. We are looking for:

  • Wholesale and Foreign Trader
  • Graduated in Electrical Engineer


PCIM Europe Nuremberg 2015

Thermally conductive pad: Thermipad TP 22715 with 15 W/mK

SPIE Smart Structures/NDE conference

Electronics & Components Hong Kong

Imports and exports of the electrical industry


InnoTrans Berlin

World Energy Engineering Congress Washington

Enova Paris

International Electric & Automation Show Bucharest

CFRP profiles

Energie Impulse Aachen

Water-jet cutting

 CWIEME in Berlin 2013

Coil Winding 2013

Thermiglue TL 23010

Coil Winding 2012

CWIEME Berlin 2012

Italian bobbin manufacturer

Working hours

NEC Birmingham UK

Advanced Engineering UK 2011

Clean Energy Expo Asia 2011

Contract 4S iPhone protectors


Electric Drives Production Conference

MOTEK 2011 and Bondexpo

IAA 2011

Norton TH

ArpaxX-Aramid Paper

Slot insulation material

Bern and public transport

Germany with great opportunities in the field of electric cars

Stamp parts from Valox for the lighting industry

Thermal management for LED – Applications

APTIV films are available as a new high performance materials

ArpaxX - push up the heat: Dr. Dietrich Müller GmbH

ZVEI: The Electrical Industry expects that the boom will continue in 2012

Lectures at the CWIEME Berlin 2011

CWIEME Berlin 2011: Dr. Dietrich Müller GmbH with a large product range

Increased Growth Forecast for the German Electrical Industry

Hannover Messe CoilTechnica:  A Good and Positive Response for Dr. Dietrich Müller

Delivery situation in Japan

FIEE: A resounding success for Dr. Dietrich Müller


Dr. Dietrich Müller: Punched parts made ​​of 3M VHB Tape

Dr. Dietrich Müller: Nomex® parts in self-adhesive version.

Dr. Müller GmbH CoilTechnica, Hannover.

Kapton MT in different varieties and Thermiflex

Dr. Müller GmbH: New product for the solar industry

Dr. Dietrich Müller registered as a UL – „Repackaged Recognized Components“ Company.

CWIEME Berlin 2010: Dr. Mueller in Ahlhorn

Dr. Mueller: High technology and innovation at one time in one venue

Dr. Müller GmbH continues its leadership as a supplier of Ultem films

Dr. Müller GmbH: New product line for films release

Dr. Müller proud of the opening of the Germany's first offshore wind park

Müller and Temac: Distribution agreement sealing materials

Get involved with the latest insulation product offerings at the Coil Winding 2010 – Dr. Müller GmbH


Direct request:

Enquiries from the United Kingdom:

Dr. Dietrich Mueller UK Limited

Tel    +44 7549 834830
Fax   +44 2476 996466


Enquiries from all other countries:

Tel: +49 4435 971010
Fax: +49 4435 971011

Let us know, which product you are
looking for and we will give you the
adress of the right distributor.



Die-cut parts

The stamping manufacture is one of the greater product sectors of the Dr D. Mueller GmbH.

Die-cut parts can be manufactured according to samples or drawings. They can also be manufactured one- or both-sided adhesive.

Delivery forms of die-cut parts

Die-cut parts are delivered loose filled, stored as well as on rolls.

If die-cut parts are loose filled, they are mainly welded in PE bags and then they are packed in boxes. Die-cut parts are packaged in bags to protect them against moisture and dirt. Loose filled die-cut parts are often combined with vibrating conveyors during manufacture.

Die-cut parts in stores
All die-cut parts can be stored. In this case the die-cut parts are packaged in special produced stores, so that they can be processed automatically in the production plants of our customers. Stored Die-cut parts can also be welded in PE film. The stores with the die-cut parts are packaged in boxes.

Die-cut parts on rolls
In addition to that die-cut parts can be delivered on rolls. These die-cut parts can be loaded automatically. Die-cut parts on rolls can be delivered adhesive or non-adhesive. These die-cut parts are also packaged in PE bags. The rolls of the die-cut parts are shipped in boxes.

Tooling technology for die-cut parts
We manufacture die-cut parts with three different tooling technologies. Steel rule die-cutting is used for the manufacture of die-cut parts up to 50,000 parts. Bigger quantities are mainly manufactured with solid tools. Die-cut parts which are delivered on rolls are mainly manufactured with rotation tools. Mass die-cut parts are only manufactured with compound dies. These tools for die-cut parts are maintained by our company.

Die-cut parts as subcontract work

We also provide this service as subcontract work.

Materials for die-cut parts

Nearly all materials can be stamped. You can buy the material or the finished part directly at our company.

The Dr D. Mueller GmbH offers the following stamping techniques:
- Rotary die-cutting
- Stroke die-cutting
- Large-area die-cutting