Mylar® polyester film

Mylar®-Elektroisolierfolien aus PETP (PET Folie)

Structure of Mylar A:

Mylar® A is made of polyethylene terephthalate (PETP) and is one of the surface insulation materials of insulation class B (up to 130 ° C).

Properties Mylar A:

Mylar polyester film® A is tensile and tear-resistant, dimensionally stable, and shows excellent electrical properties. This material has good heat and cold resistance and is resistant to common solvents.

Mylar® A is UL-approved (UL file E93687). Since the Dr. Dietrich Müller GmbH is recognized as a UL recognized repackager, the materials processed by us do not lose their UL approval.

Application of Mylar A:

Mylar® A is used as intermediate and top layer insulation in transformers, chokes, and relay coils.

It is also used as slot and phase insulation, as a cover slide and slot sleeve in electrical machine, generator and magnet construction and as an insulating layer in electrical devices.

Mylar A is also used as a stencil material. Here, contours are usually cut with the laser.

Storage conditions:
Mylar®A can be stored indefinitely under normal conditions (20 ° C, 50% relative humidity).
Delivery forms:

Thickness:
0,019 mm
0,023 mm
0,036 mm
0,050 mm
0,075 mm
0,100 mm
0,125 mm
0,190 mm
0,250 mm
0,300 mm
0,350 mm
0,500 mm

Broad:
Rolls up to approx. 1000 mm, special widths up to 4000 mm possible
Ribbons from 10 mm wide also feathered
Sheets 1000 x 900 mm

Mylar A products:
Nut insulation
Cover slide
Caps
Phase isolations
Coil insulation
End plates
Stamped parts
Blanks
Insulating washers
nsulating sleeves
Flange insulation
Seals
Molded parts
Collar stiffeners
Color box foil
Connector isolation
Battery insulation
Insulating plate
Airbrush stencil

Klebebänder aus Mylar A

Adhesive tapes can also be made from various thicknesses. For this purpose, the Mylar A polyester film is coated with various adhesive systems. Mylar A is mainly coated with acrylate adhesives, for some special applications we also offer Mylar A coated with silicone adhesive.

Unterlegscheiben aus Mylar A

We use this Mylar A polyester film to manufacture a large number of standard sealing washers for various industrial applications.

Due to the good heat and cold resistance of the mylar, the material can be used in a large number of applications.

We deliver the following dimensions: M3 M4 M5 M6 M8 M10

Other dimensions are also to be made.

Gewickelte Rohre aus Mylar A

We wind pipes from the polyester film Mylar A, which can then be used to insulate bolts or connections.

These insulating sleeves can be manufactured in a wide variety of diameters.

 

Mylar and Nomex spiral wound tubes
Mylar and Nomex spiral wound tubes

Produkte

Nut insulation
Cover slide
Caps
Phase isolations
Coil insulation
End plates
Stamped parts
Blanks
Insulating washers
nsulating sleeves
Flange insulation
Seals
Molded parts
Collar stiffeners
Color box foil
Connector isolation
Battery insulation
Insulating plate
Airbrush stencil
Protective film

Datenblätter Mylar A

The data sheets for Mylar A and other polyester films can be found at this link:

Datasheets Mylar A