PEEK adhesive tape as an alternative to PI adhesive tapes

PEEK Klebeband

PEEK adhesive tape as an alternative to PI adhesive tapes

PEEK adhesive tape as an alternative to PI adhesive tapes

PEEK tapes are a good alternative to polyimide tapes. PEEK is a material that offers the best combination of friction and wear properties, combined with high temperature resistance, chemical resistance and excellent electrical insulation. It is therefore ideal for use in a wide range of applications such as insulation, gaskets, aerospace components, high performance labels, semiconductor process equipment, and more.

10 advantages of PEEK tape

  • Extremely high temperature resistance and long-term use temperature
  • Excellent flexural and tensile strength
  • Good abrasion resistance
  • Excellent chemical resistance to solvents, acids, bases, fuels and hydrocarbons, even at elevated temperatures
  • Hydrolysestabil
  • Very good electrical properties over a wide frequency and temperature range
  • Extremely low permeability
  • Glue resists moisture and harsh chemicals
  • Extremely low permeability
  • PPE is easy to use and position

Compared to polyimide film, PEEK film has lower moisture absorption, better performance in highly alkaline environments and higher tear resistance.

Areas of application for PEEK adhesive tapes

PEEK adhesive tapes made of seals are used in fuel cells, battery applications and in medical technology.

PEEK tape meets a wide variety of aerospace, automotive, medical approvals and standards.

one-sided adhesive PEEK tape

PEEK can be supplied coated on one side with an acrylate adhesive or with a silicone adhesive. There is also the option of covering the product with a masking paper or to get with a cover sheet.

double-sided adhesive PEEK tape

PEEK can be supplied coated on both sides with an acrylate adhesive or with a silicone adhesive. There is also the option of covering the product with a masking paper or to get with a cover sheet.

Die-cut parts made from PEEK adhesive tape

PEEK adhesive tape can be processed into punched parts based on drawings, sketches or samples. These die-cut parts can be delivered on a roll, as individual parts or in a magazine.

Share this post