VPV / DMD - Laminates

  • Insulating class F (up to 155°C)
  • Flexible 3-layer insulation of polyester film
  • With impregnated fleece coating on both sides
  • High dielectric strength
  • High mechanical stability
  • The smooth surface makes for good machinability
  • Good adhesion behaviour in combination with impregnating resins

These brands are available from us:

Flexiso®, Evitherm®, Voltaflex®, Triflexil M/VL-UE®

Dr. Müller as the contact for DMD parts

When it comes to DMD, we are the right contact. You can buy DMD in rolls, sheets or machined parts from us.
We carry DMD in various thicknesses. In stock we have DMD sheets up to a thickness of 1.4 mm. We also have rolls in stock from 0.09 mm thickness.

Adhesive tapes made of DMD

DMD is also supplied in self-adhesive form, e.g. as adhesive tapes. These can be equipped with various adhesive systems.

DMD in the form of stamped parts

DMD is processed in large quantities into insulating parts, seals and washers using the stamping manufacturing process.

Laser processing of DMD

Laser processing of DMD can be performed with either a 10.6 µm or a 9.3 µm CO2 laser.

Laser cutting of DMD with a CO2 laser produces a clean cut with minimal discoloration.

Laser marking of insulating paper with a CO2 laser produces a non-removable surface mark with no depth that can be either lighter or darker, depending on the material being processed.

Laser engraving of DMD produces both depth and contrast, depending on the material being processed, and is limited to the thickness of the material.

Applicable laser processing methods for DMD

  • Laser cutting
  • Laser marking
  • Laser engraving

DMD samples

For sampling, you can receive small sections of DMD from us free of charge. For larger DMD samples, we will charge you for the DMD, which we will then credit back to you when you purchase DMD parts from us.

DMD data sheets

Data sheets for the material DMD can be downloaded by clicking on the PDF symbols. Here you can see the characteristics of the material, such as temperature resistance or chemical resistance and dielectric strength.

Application engineering advice for DMD

If you need data on DMD that you cannot find in the data sheets, our application engineering department will be happy to advise you. We can also advise you on the production of stamped parts made of DMD, molded parts made of DMD and cover slides made of DMD.

Production Workers
Parts Supplied