Here you will find the latest news from the Dr. Dietrich Müller GmbH

Enova Paris

Enova Paris

Ahlhorn | August 20th 2014 The enova Paris is a fair for electrical engineering, measurement engineering and optical technologies. This year the fair is held from September 16th to September 18th. Although the enova in Paris is a quite young fair,...


Posted By Category: News ENComments: 0
International Electric & Automation Show Bucharest

International Electric & Automation Show Bucharest

Ahlhorn | August 14th, 2014 The annual International Electric & Automation Show Bucharest starts on September 09th and ends on September 12th this year. The IEAS is a fair for energy, electric and automation. This international specialized fair mainly deals with...


Posted By Category: News ENComments: 0
Coilwinding Berlin & Dr. Dietrich Müller: also attending this year

Coilwinding Berlin & Dr. Dietrich Müller: also attending this year

Ahlhorn | May 19th, 2014 The Dr D. Müller GmbH also attends at the international Coil Winding, Insulation & Electrical Manufacturing fair which takes place in Berlin from June 24th to 26th 2014. Dr D. Müller GmbH introduces the product range...


Posted By Category: News ENComments: 0
Actuator

Actuator Bremen

Bremen | 10.04.2014 The Actuator in Bremen from 23.06.2014 - 25.06.2014 presents components, system solutions and applications of intelligent actuators and low-power electromagnetic drives based on conventional (electromagnetic) and innovative operating principles (new actuators), and related contents. The list of...


Posted By Category: News ENComments: 0
Thermally conductive adhesive – the new two-component Thermiglue TL 23010

Thermally conductive adhesive – the new two-component Thermiglue TL 23010

Ahlhorn | March 25th, 2014 The thermally conductive adhesive Thermiglue TL 23010 is just one of the interesting products of the wide product range of Dr D. Mueller. The new product Thermiglue TL 23010 is now available and catches with many...


Posted By Category: News ENComments: 0
Pertinax® - traditional material with new future

Pertinax® – traditional material with new future

Ahlhorn | January 6th 2014 Dr. Dietrich Müller GmbH also continues extending their product and material range this year. The latest addition to the product range is the trademark Pertinax®. Composition of Pertinax® Many people think of Pertinax® when they hear hard...


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Punched parts from foils and flexible materials

Ahlhorn | 02.12.2013 Tailor-made stamped parts made of flexible materials and films are the passion of the Ahlhorn-based company Dr. Dietrich Müller GmbH. More and more industrial companies from the automotive and electrical industries are looking for alternative materials and processing...


Posted By Category: News ENTags: , , Comments: 0
Formex

Halogen free Formex CN films

Ahlhorn |  November 6th | 2013 The Dr D. Mueller GmbH, the leading provider of electrical insulating materials, thermally conductive products, gaskets and technical films, is pleased to announce that their delivery programme was extended through the halogen-free Formex CN...


Posted By Category: News ENTags: , , Comments: 0
Messe 2013

High expectations for K 2013 exceeded

Düsseldorf | 24.10.2013 Companies from the plastics and rubber industry came to Düsseldorf for their most important trade fair worldwide, K 2013, with high expectations. A sector economy that has been picking up for months and the certainty of the companies...


Posted By Category: News ENComments: 0
Bondexpo

Bondexpo – trend-setting industry meeting point for bonding technology

Stuttgart | 08.10.2012 This year the Bondexpo is taking place for the sixth time. It thus impressively documents the necessity of looking beyond the horizon in order to be able to present the production and assembly technology process kettles without...


Posted By Category: News ENComments: 0
CFK-Rohre

Dornier Museum: The dawn of the carbon age

Friedrichhafen | 24.09.2013 The special exhibition "Into the future with carbon fiber" was opened at the Dornier Museum Friedrichshafen. The show is intended to present all aspects of the revolutionary material CFRP (carbon fibre reinforced plastic) with 75 attractive exhibits...


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Elaine Münke best exam in the district of Oldenburg

Ahlhorn | 23.08.2013 The Oldenburg Chamber of Industry and Commerce awarded the best exam results in the final examinations summer 2013 in Oldenburg on August 23, 2013. 157 out of a total of 4022 candidates passed with the grade "very good"....


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Reaction to conflict materials

Ahlhorn | August 19th | 2013 In the past few years armed rebels of the Democratic Republic of the Congo or of neighbouring countries have broken ore. They also have smuggled this broken ore to finance their rebellious activities. These actions...


Posted By Category: News ENComments: 0
eCar Tec

eCarTec: The whole world of e-mobility

Munich | 15.08.2013 From 15 to 17 October 2013, eCarTec Munich - 5th International Trade Fair for Electric Mobility and Hybrid Technology - will take place at the Munich Exhibition Centre. In recent years, eCarTec has developed into the most...


Posted By Category: News ENComments: 0
IFA

IFA 2013 Innovations Media Briefing: Exhibitor statements

Berlin | 11.07.2013 Industry builds on market impulses from IFA - Leading global trade fair reflects the growth and innovation dynamics of the industries. The exhibition grounds will be open to IFA visitors from September 6 to 11, 2013, daily...


Posted By Category: News ENComments: 0
intersolar2013

Intersolar Europe 2013

Munich | 21.06.2013 Around 50,000 visitors from more than 150 countries streamed through Intersolar Europe at the Munich Exhibition Center over the past three days. A total of 1,330 exhibitors from 47 countries presented their technologies and services in the fields...


Posted By Category: News ENComments: 0
CWIEME Berlin 2013

CWIEME in Berlin again a great success

CWIEME in Berlin Dr. Dietrich Müller GmbH, leading supplier of electrical insulation materials for electric motors; generators and transformers, presented a wide range of technical solutions specially adapted to applications in the electrical and electronics industry at the international trade...


Posted By Category: News ENComments: 0
techtextil

Techtextil

Frankfurt | 05.06.2013 The international industry meeting places Techtextil (11 to 13 June 2013) and Texprocess (10 to 13 June 2013) will start with an outstanding number of registrations. Altogether, the textile trade fair duo at the Frankfurt exhibition venue offers...


Posted By Category: News ENComments: 0
Kleber Thermiflex TF 21403

Change of adhesive Thermiflex TF 21403

Ahlhorn | 24.05.2013 In the course of the continuous improvement of our products, we have made changes to our heat conducting material Thermiflex TF 21403. Thermiflex TF 21403 is based on a MT film coated on one side with a modified,...


intersolar2013

Aktuelle Trends, neueste Technologien und internationale Märkte der Intersolar Europe 2013

Munich | 22.05.2013 From 19 to 21 June 2013 Messe München will once again become the centre of the international solar industry. At Intersolar Europe, the world's largest exhibition for the solar industry, visitors from all over the world can...


Posted By Category: News ENComments: 0
Messeaufbau Dr Dietrich Müller GmbH

Coilwinding 2013 | Dr. Müller and Stand 3425 in Halle 3.2

Ahlhorn | Berlin | 18.05.2013 Dr. Dietrich Müller GmbH, leading supplier of electrical insulation materials for electric motors, generators and transformers, will be presenting a wide range of technical solutions specially adapted to applications in the electrical and electronics industry...


Posted By Category: News ENComments: 0
Composites Europe

COMPOSITES EUROPE 2013

Ahlhorn | 15.05.2013 The next COMPOSITES EUROPE will take place in Stuttgart from 17-19 September 2013. At the same time, the new HYBRID Expo will celebrate its premiere at the Stuttgart Trade Fair Centre. With this trade fair for hybrid materials,...


Posted By Category: News ENComments: 0
PCIM - International Exhibition and Converence for Power Electronics, Intellegent Motion, Renewable Energy and Energy Management

Own exhibition space for energy storage technologies at the PCIM Europe 2013

Nuremberg | 15.05.2013 A separate marketplace will be created at PCIM Europe 2013 for companies from the Energy Storage segment. At a Focus Area, manufacturers will have the opportunity to present their products and solutions and meet development engineers from user...


Posted By Category: News ENComments: 0
Sabic Lexan

Lexan

Bergen op Zoom | 12.05.2013 Sabic Innovative Plastics is again expanding its range of lexan polycarbonate films. According to the manufacturer, the three technical "Lexan" polycarbonate film grades "HP92TTY", "6060" and "OQ8DA" presented are characterized by high optical quality and special...


Posted By Category: News ENComments: 0
LIGNA

LIGNA 2013: summit meeting of the forestry and timber industry

Ahlhorn | Hanover | 06.05.2013 Impressive international scope, a host of technical innovations and full market coverage: even before LIGNA 2013 begins in Hannover from May 6 to 10, the world's leading trade fair for the forestry and woodworking industries...


Posted By Category: News ENComments: 0
Converflex 2013

Converflex 2013 in Mailand

Milan | 04.05.2013 Converflex is one of the most important international events in the field of converting, package printing, labelling and tissue. For more than 30 years, Converflex has hosted technology providers and manufacturers from around the world to provide concrete...


Posted By Category: News ENComments: 0
Messe 2013

K-Messe 2013 in Düsseldorf

Exhibitor database is online / Online ticket shop starts in March / K-App for Android and Apple There are still seven months to go until K 2013 starts in Düsseldorf, but the world's most important trade fair for plastics and...


Posted By Category: News ENComments: 0
E-Monday

e-Monday on 29 April 2013 in Munich

Munich | 06.04.2013 The next e-Monday is dedicated as usual to the topic of electric mobility and will take place on April 29, 2013 at 6:30 pm in the Hofbräukeller of Innere Wiener Straße 19 in Munich. Two very interesting...


Posted By Category: News ENComments: 0
HF-Schweissen

HF Welding

Ahlhorn | 16.04.2013 Many of the materials passed through Dr. Dietrich Müller GmbH are also used as welding underlays in HF welding. Psp/Film/PSP with GL coating Pertinax hard paper plates Polyester film film PTFE glass fabric film Silicone fabric foils In...


Posted By Category: News ENComments: 0
VDI

Producing LED lights in optimal quality

Düsseldorf | 12.04.2013 The 2nd VDI conference "Service life and quality assurance in LED lighting" on 26 and 27 June 2013 in Düsseldorf will discuss the entire value chain from package to luminaire. The conference will start with presentations on lifetime...


Posted By Category: News ENComments: 0
PCIM - International Exhibition and Converence for Power Electronics, Intellegent Motion, Renewable Energy and Energy Management

Innovative solutions of trend-setting technologies at PCIM Europe 2013

All the major power electronics companies from Germany and abroad will present their innovations in Nürnberg from 14-16 May 2013. The future markets for regenerative energy generation, smart grids, energy efficiency or consumer electronics play a strong role here. Power...


Posted By Category: News ENComments: 0
Smt hybrid packaging

SMT Hybrid Packaging 2013

Nuremberg | 11.04.2013 SMT Hybrid Packaging 2013 in Nuremberg from 16 - 18 April 2013 offers a comprehensive overview of products and services for system integration in microelectronics. Numerous small and medium-sized companies, including several first-time exhibitors, will present themselves. Live...


Posted By Category: News ENComments: 0
Prolight and sound

Pro light sound 2013

Frankfurt | 10.04.2013 With 41,000 visitors and 876 exhibitors from 41 nations, prolight+sound 2012 has reached the record results of the previous year. The world's biggest international trade fair for events, installations and productions will take place in Frankfurt from 10...


Posted By Category: News ENComments: 0
Hannover Messe

Hanover trade fair 2013

Ahlhorn | 01.04.2013 With its clear focus on core technologies and services in industrial production, innovation and efficiency, HANNOVER MESSE has met with an outstanding response from companies and institutions around the world. With five main themes, HANNOVER MESSE is very...


Posted By Category: News ENComments: 0
International Converting Exhibition

The ICE Europe 2013 – a great success

Munich | 27.03.2013 With a further increase of 16% in the number of trade visitors compared to the previous event, ICE Europe 2013 was the largest international trade fair for the converting industry to date. A total of 6,600 visitors...


Posted By Category: News ENComments: 0
Video Camera Display

Extended office service of Dr. Dietrich Müller GmbH

Ahlhorn | 11.03.2013 In order to offer an extended service, Dr. Dietrich Müller GmbH has extended its office hours. The sales and order processing staff of Dr. Dietrich Müller GmbH are now available for inquiries from Monday to Friday from 07:00...


Posted By Category: News ENComments: 0
Spezial Fombauteile

Insulating film with special properties: Formex

Ahlhorn | 11.03.2013 Formex is a flame-retardant polypropylene film which is mainly used in the electrical industry. Due to its high dielectric strength, low moisture absorption and UL94V-0 class, this film meets the requirements of the electrical industry when it...


Posted By Category: News ENComments: 0
Energy Storage

Energy storage

Düsseldorf | 10.03.2013 The energy supply is facing a change. Not least the events in Japan last year and Germany's nuclear phase-out contribute to moving the energy turnaround into the near future. The event will take place on 18 and 19...


Posted By Category: News ENComments: 0
Beschichtete Nomex-Papiere für den Transformatoren- und Elektromotorenbau

Coated Nomex papers for the construction of transformers and electric motors

Ahlhorn | 01.03.2013 In addition to pure Nomex papers, Dr. Dietrich Müller GmbH also supplies Nomex laminates with polyester film and polyimide film. Stamped and formed parts are also produced from this. The product range also includes Nomex papers coated with...


Posted By Category: News ENTags: , , Comments: 0
Thermal Management Lösungen für eine perfekte thermische Leitfähigkeit

Thermal Management Solutions for perfect thermal conductivity

Ahlhorn | 20.02.2013 Electronic components of all kinds generate heat during operation due to their power loss, which limits their performance. In order to dissipate this heat, heat sinks are used to avoid a too high ambient temperature, which reduces...


Posted By Category: News ENComments: 0
INTEC Fachmesse für Fertigungstechnik

Intec 2013 mit Sonderschau

Ahlhorn | 14.02.2013 The processing of new materials, one of the key topics in production technology, will be the focus of attention at the Leipzig engineering trade fair intec from 26 February to 1 March 2013. As part of a special...


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Expert Forum Quality

Ahlhorn | 04.02.2013 What successful companies do differently! - an event of the Leipzig Quality Initiative during Z and intec 2013. The Leipzig Quality Initiative traditionally invites to its expert forum on quality during Z and intec. This year, the event will...


Posted By Category: News ENComments: 0