Here you will find the latest news from the Dr. Dietrich Müller GmbH

Dr. Dietrich Müller GmbH: Germany with great opportunities in the field of electric cars.

Germany with great opportunities in the field of electric cars.

Ahlhorn | 31.08.2011 According to a report in the Nordwest-Zeitung 30.08.2011, a newspaper from Oldenburg Germany, electric cars will create the breakthrough to the mass market by 2022, and German manufacturers will be, in the opinion of 300 European senior...


Dr. Dietrich Müller GmbH: Stamped parts from Valox for the lighting industry

Stamped parts from Valox for the lighting industry

Ahlhorn | 09.08.2011 In addition to the conventional films for electrical insulation, such as Mylar, Nomex, ArpaxX, Hostaphan and Lexan, Dr. Dietrich Müller GmbH also processes Valox film from the company Sabic to stamp parts for the lighting industry. Valox® FR-1...


Posted By Category: News ENTags: , , Comments: 0
ArpaxX with UL 94 - VO

ArpaxX with UL 94 – VO

Developed by Dr. Dietrich Müller GmbH, ArpaxX aramid paper meets the standard UL 94-V0, this was originally developed in the U.S. for the testing of plastics for electrical devices. V0 means self-extinguishing within 10 seconds, although burning drops are not...


Posted By Category: News ENTags: , Comments: 0
Exhibition setup Dr Dietrich Müller GmbH

ArpaxX Aramid paper

ArpaxX – push up the heat Nothing is so good that it can not be further improved and optimized. The ArpaxX series brings Dr. Dietrich Müller GmbH a completely new generation of premium Aramid Paper on the market that sets...


Posted By Category: News ENTags: , Comments: 0
APTIV films as a new high performance materials available

APTIV films as a new high performance materials available

Ahlhorn | Hofheim |  24.06.2011 Victrex APTIV® films provide all of the outstanding properties of VICTREX PEEK polymer in a thin film format. Manufactured to exacting quality standards on state-of the -art equipment, APTIV films provide a balance of properties...


Posted By Category: News ENTags: , Comments: 0
Exhibition stand

ArpaxX – push up the heat

Ahlhorn | 5,24,2011 By ArpaxX series;Dr. Dietrich Müller GmbH brings a whole new generation of premium-aramid on the market. ArpaxX – push up the heat Nothing is so good that it can not be further improved and optimized. The ArpaxX series brings...


Posted By Category: News ENTags: , Comments: 0
Lectures at the CWIEME Berlin 2011

Lectures at the CWIEME Berlin 2011

Ahlhorn | Berlin | 20.05.2011 We are delighted to invite you to our two lectures which will be held at the largest exhibition for Coil Winding and Electrical Insulation, CWIEME Berlin 2011. We are delighted to invite you to our two...


Posted By Category: News ENComments: 0
UL-Seminar: Produkthaftung in den USA

UL seminar: Product liability in the USA

Ahlhorn | USA | 05.05.2011 Underwriters Laboratories is offering a seminar on 16.06.2011 in Neu-Isenburg with the title "Product liability in the USA for manufacturers of electrical and electronic devices" UL will hold the seminar in German language. Please register directly with...


Posted By Category: News ENTags: Comments: 0
CWIEME Berlin 2011: Dr. Dietrich Müller GmbH with a large product range

CWIEME Berlin 2011: a large product range

Ahlhorn | 29.04.2011From 24th to 26th May the company Dr. Dietrich Müller GmbH will be exhibiting for the 13th time at this year’s CWIEME Berlin 2011, which is accepted as the world’s largest exhibition for Coil Winding and Electrical...


Posted By Category: News ENTags: , , , Comments: 0
FIEE ELÉTRICA 2011: Dr. Dietrich Müller GmbH & Dr. Dietrich Müller do Brasil Ltda

FIEE ELÉTRICA 2011

Ahlhorn | 22.3.2011 The companies Dr. Dietrich Müller GmbH and Dr. Dietrich Müller do Brasil Ltda will participate together at the two great inter-related shows FIEE ELÉTRICA and Electronicamericas, which is considered as the main event leader in Latin America,...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller: Punched parts made ​​of 3M VHB Tapes

Punched parts made ​​of 3M VHB Tapes

Ahlhorn | 16.03.2011 As well as a range of punched and moulded parts made from non-adhesive materials, such as Nomex®®, Mylar®, Hostaphan® and Pertinax®, Dr. Dietrich Müller GmbH (Ahlhorn) also manufactures punched parts with adhesive materials. They consist of a...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller: Nomex ® parts in self-adhesive version.

Nomex ® parts in self-adhesive version.

Ahlhorn | 04.03.2011 Stamped and moulded parts of the DuPont Nomex® aramid paper of the types 410, 411 and 414 are used in many areas of the electrical and electronic industries. The paper is installed in enclosures or used as insulation...


Posted By Category: News ENTags: , , Comments: 0
Dr. Dietrich Müller GmbH at CoilTechnica in Hannover.

CoilTechnica in Hannover.

Ahlhorn | Hannover | 23.02.2011Dr. Dietrich Müller GmbH, a leading supplier of electrical insulating materials made of flexible and rigid materials, will take part this year in the leading trade show CoilTechnica, which will be held from 4th to...


Posted By Category: News ENTags: , , Comments: 0
Stanzteile aus Formex- und Statex-Folien

Stamped parts from Formex and Statex films

Ahlhorn | 26.01.2011 Dr. Dietrich Müller GmbH has expanded its range of materials to include Formex and Statex films from ITW Formex. Dr. Dietrich Müller GmbH, a leading converter of electrical insulation materials, heat conducting products, gaskets and technical films, has...


Posted By Category: News ENTags: , , , Comments: 0
ArpaxX with UL 94 - VO

UL-registered Repacked-Recognized Company

Ahlhorn | 12.10.2010 Dr. Dietrich Müller GmbH has been registered as a Repackaged - Recognized Company at UL, after COMPONENT - REPACKAGED RECOGNIZED COMPONENTS of the category (TEOU2). The company has been registered under the UL file number E341377 and thus...


Posted By Category: News ENTags: , , Comments: 0
Formstanzteile aus Klebebändern

Die-cut parts from adhesive tapes

Ahlhorn | 10.11.2010 Dr. Dietrich Müller GmbH supplies a wide range of punched and formed parts made of adhesive tapes for various branches of industry. We process adhesive tapes with the following processing techniques, among other things, into insulating parts: Cutting Blank for...


Polyimidfolie

Die-cut parts from adhesive tapes

Polyimide film, adhesive Punched parts from adhesive tapes make sense for large production quantities, as they offer great time savings.Dr. Dietrich Müller GmbH produces labels, die-cut parts and adhesive tapes for industrial customers. These include mechanical engineers as well as...


Posted By Category: News ENTags: , Comments: 0
Dr. Dietrich Müller registered as a UL – „Repackaged Recognized Components“ Company.

UL – „Repackaged Recognized Components“ Company

Ahlhorn | 12.10.2010   The company Dr. Dietrich Müller GmbH is registered with UL under the category name „Repackaged Recognized Components“ code TEOU2.    The company is registered under the UL File Number E341377, which determines that the company meets the UL...


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Secondary processes

Secondary processes Victrex APTIV film facilitates a wide range of secondary processes which allow designers and engineers to obtain the performance properties of APTIV film in a variety of forms. In addition to in-house capabilities, which include prototype-scale thermoforming and...


Posted By Category: News ENComments: 0
Dr Dietrich Müller GmbH

Properties

Moisture Uptake Under general atmospheric conditions of 50% relative humidity (RH), APTIV 1000 film shows low moisture absorption. As a result APTIV 1000 film exhibits stable mechanical, dielectric and dimensional properties.Tensile Modulus APTIV 1000 film has excellent tensile modulus. Further enhanced...


Posted By Category: News ENTags: , Comments: 0
Dr Dietrich Müller GmbH

Film grades

APTIV film grades APTIV film is available in several grades according to the specific needs of the end use application. Within each grade a broad range of thicknesses are available from 6 to 750 microns (0.25 to 30 mils). The standard width of...


Posted By Category: News ENTags: , , Comments: 0
Dr Dietrich Müller GmbH

Key Features

High Heat Resistance APTIV film has a RTI rating of 220°C (428°F) for mechanical use without impact and 200°C (392°F) for electrical use for 25–125 micron films, and is capable of withstanding lead-free solder processing temperatures of up to 300°C (572°F). Excellent Wear...


Posted By Category: News ENTags: , Comments: 0