Current

Here you will find the latest news from the Dr. Dietrich Müller GmbH

Die-cut parts from adhesive tapes

Die-cut parts from adhesive tapes

Polyimide film, adhesive Die-cut parts made from adhesive tapes make sense for large production quantities, as they save a great deal of time. The Dr. Dietrich Müller GmbH produces labels, die-cut parts and adhesive tapes for industrial customers. This includes mechanical engineers as well as automotive suppliers, the electrical engineering, and plastics industries. Die-cut parts made of adhesive tape are made from all adhesive tapes that the company offers. These can be delivered on a roll or as an individual part. Die-cut parts are used to protect surfaces and to seal connections. For example, temperature-resistant adhesive tapes made of polyimide film protect contacts in the surge bath when soldering. Formstanzteile aus PE-Folien, Polyimid-Klebeband oder klebenden Schäumen bewahren empfindliche Stoffe vor Kratzern an Stellen, die beim Transport potenziell beschädigt werden. In electronic devices, die-cut parts made of adhesive tapes made of suitable materials are used for various functions. For example, they connect heat sinks with...

Read more...
Dr. Dietrich Müller registered as a UL - "Repackaged Recognized Components" Company.

UL-Registered Repacked-Recognized Company

Ahlhorn | 12.10.2010 The Dr. Dietrich Müller GmbH has been registered as a Repackaged - Recognized Company with UL, according to COMPONENT - REPACKAGED RECOGNIZED COMPONENTS of the category (TEOU2). The company was registered under the UL file number E341377 and thus provides evidence that the Dr. Dietrich Müller supplied and processed insulation materials with UL approvals can be clearly assigned. Even so far, the traceability through the EDP system of the company Dr. Dietrich Müller can be guaranteed. For customers of Dr. Dietrich Müller GmbH's listing of the company as a so-called repackager makes it easier for the quarterly UL inspector to provide evidence of materials. The Dr. Dietrich Müller GmbH is one of the leading processors of UL-approved materials, such as B. Nomex®, Mylar® from DuPont, or laminates made from these materials. About Dr. Dietrich Müller Today the Dr. Dietrich Müller GmbH Ahlhorn and the South American subsidiary Dr. Dietrich Müller do Brasil...

Read more...
Dr. Dietrich Müller GmbH at CoilTechnica in Hannover.

CoilTechnica, Hannover

Ahlhorn |Hannover | 23.02.2011 CoilTechnica 2011: Dr. Müller GmbH The Dr. Müller GmbH, a leading supplier of insulating parts made from flexible and rigid electrical insulating materials, is exhibiting at CoilTechnica, which is integrated into the Hanover Fair this year. This fair takes place from 4. – 8. April in Hanover. This new leading trade fair for the production of coils, electric motors, generators and transformers offers an ideal environment for addressing existing and new customers. The Dr. Dietrich Müller GmbH will show its extensive possibilities in the production of parts from Mylar®, Nomex®®, Ultem® as well as laminates from these products and the processing possibilities of the CNC production of laminates (including EP GC 203 and Pertinax). The state of Dr. Müller GmbH can be found in hall 7, stand number D14. About Dr. Müller GmbH Today the Dr. Müller GmbH Ahlhorn and the South American subsidiary Dr. Dietrich Müller do Brasil Ltda. One of...

Read more...
Nomex parts in self-adhesive version.

Nomex® molded parts also in self-adhesive design.

Ahlhorn | 04.03.2011 In many areas of the electrical and electronics industry, punched and molded parts are made from the aramid paper Nomex manufactured by DuPont® used in types 410, 411, and 414. The paper is installed in housings as insulation or used in transformers as layer insulation. In many cases, these Nomex parts were attached by manufacturing workers with liquid adhesives, adhesive tapes or transfer adhesives to do the insulation tasks. The Dr. Dietrich Müller GmbH, leading converter from well-known brands such as Nomex®, Mylar®, Ultem®, Norton TH®, Pertinax®, Hostaphan®, and Lexan®, is able to make even complex molded and stamped parts self-adhesive and to make them available in an optimized manner for production. Parts from Nomex® that are already self-adhesive simplify assembly in the production lines and thus save costs. The adhesive films that are used can have different classes of insulation material, and silicone, rubber and acrylate-based adhesives are also possible. About Dr....

Read more...
Dr. Dietrich Müller GmbH

Delivery situation Japan

Ahlhorn | 06.04.2011 We have taken the dramatic events in Japan and the resulting possible consequences with regard to the supply of materials as an opportunity to check our suppliers with regard to their delivery reliability. We do not expect any delivery problems. Electrical insulation materials The supply of Teonex Q51 is covered by stocks at our partners. Alternatively, we could offer you PEN films from other manufacturers. Nomex® - Products that are also made in Japan can also be obtained from our partners' warehouses. It is also possible to obtain these aramid papers from the DuPont production facility in the USA. Thermal interface products Our thermal conductivity products (pastes, pads, foils and potting compounds) are manufactured in our own factories. Primary materials from Japan are not used here. Seals No primary materials from Japan are used in our sealing materials, which are mainly supplied by Tomac. Technical foils The technical films that we sell are not extruded...

Read more...
CWIEME Berlin 2011: Dr. Dietrich Müller GmbH with a large product range

CWIEME Berlin 2011: wide range of products

Ahlhorn | 29.04.2011 From 24th to 26th May the Dr. Dietrich Müller GmbH for the 13th Time at this year's CWIEME Berlin 2011, which is seen as the world's largest exhibition for coil winding and electrical insulating materials in Berlin. Dr. Dietrich Müller GmbH has been active in the areas of product development and research for more than four decades and offers a wide range of flexible electrical insulation materials for electrical machines, transformers and generator construction. The Ahlhorn company Dr. Dietrich Müller GmbH offers suitable laminates and pultruded profiles for every imaginable area of ​​application as well as products with excellent thermal and electrical properties Nomex®, Pertinax®, Mylar® and Glimmer exhibit at the coil winding fair. The company regularly certifies the quality of its products and services in accordance with DIN EN ISO 90001: 2000. The Ahlhorn company is also recognized by UL as a Repacked-Recognized Company. The team of Dr. Dietrich...

Read more...
Dr. Dietrich Müller at the exhibition at the NEC Birmingham UK: Premiere at the Advanced Engineering UK 2011

Exhibitions in England: Premiere at Advanced Engineering UK 2011

Ahlhorn | Birmingham | 07.11.2011 The Dr. Dietrich Müller GmbH is established together with the sales and production company Dr. Dietrich Müller (UK) Ltd. at the Advanced Engineering UK 2011, which took place from 09. until Taking place November 10th in Birmingham, England. Combining some of the fastest growing technology sectors in England, this show consists of four themed areas: 1. the Composites Engineering Show2011, 2. the Aero Engineering2011, the Energy Engineering2011 and 4. the UK Plastic Electronics Show2011. The Dr. Dietrich Müller GmbH has been active in the areas of product development and research for more than four decades and offers a wide range of flexible and rigid electrical insulation materials for electrical machine, transformer and generator construction as well as for other branches of industry. The company focuses on providing solutions to complex problems and can draw on a wide range of materials. The Ahlhorn company Dr. Dietrich Müller GmbH offers...

Read more...
Dr. Dietrich Müller GmbH: Stamped parts from Valox for the lighting industry

Stamped parts from Valox for the lighting industry

Ahlhorn | 09.08.2011 In addition to the classic insulation foils for electrical engineerings, such as Mylar, Nomex, ArpaxX, Hostaphan, and Lexan, processed by Dr. Dietrich Müller GmbH too Valox-Folien the Sabic company for stamped parts for the lighting industry. Valox properties Valox® FR-1 combines very excellent temperature resistance with particularly high chemical resistance, excellent dielectric strength, and low moisture absorption. In addition, Valox FR 1 is characterized by excellent electrical properties in combination with exceptionally good processability and a high surface quality. This PBT film with a thickness of 0.5 mm (other thicknesses are also available) and with a UL 94 V0 listing meets even increased fire protection requirements for demanding applications in electrical engineering and electronics. Valox® FR-1 is UL94-VTM-0 listed from 125 microns. Due to its excellent dielectric strength and easy processing (ie heat forming, embossing, burr-free die cutting, folding and bending), VALOX FR-1 film is very well suited for a variety...

Read more...
Dr. Dietrich Müller GmbH: Germany with great opportunities in the field of electric cars.

Germany with great opportunities in the field of electric cars.

Ahlhorn | 31.08.2011 According to a report in the Oldenburger Nordwest-Zeitung dated August 30, 2011, electric cars will achieve the breakthrough to the mass market by 2022 and German manufacturers will be at the forefront according to 300 European top managers. The fact that German manufacturers and suppliers are investing billions in the development of alternative drives is seen as the decisive factor for this development. Dr. Dietrich Müller GmbH has many years of experience as a supplier to the automotive industry and is, therefore, a suitable supplier for the topic of eMobility. These include the electrical insulation materials, thermal conductivity products, seals and technical foils from the Ahlhorn company. The Dr. Dietrich Müller GmbH meets the expectations of the automotive industry by providing materials and manufacturing processes in order to find cost-effective solutions. Electrical insulation materials for hybrid and electric vehicles The Dr. Thanks to its experience, Dietrich Müller GmbH is able to...

Read more...
Ineltec.Automation Technology

Ineltec.Automation Technology

Ahlhorn | Basel | 12.9.2011 The Ineltec.Automatisierungstechnik takes place from 13.09. to 16.09.2011 in Hall 1.0 on the ground floor of Messe Basel. The opening times are from Tuesday to Thursday from 9 a.m. to 6 p.m. and on Friday from 9 a.m. to 4 p.m. If you would like to contact a representative, please send an email to info@mueller-ahlhorn.com.

Read more...
Dr. Dietrich Müller: Norton TH for a variety of applications in the electrical engineering sector

Norton TH for a wide variety of electrical engineering applications

Ahlhorn | 16.09.2011 The high-performance material Norton TH is suitable for a large number of applications in the electrical engineering sector: The product can be used as a Nutisolation and Cover slides are used in traction motors, as an intermediate layer in transformers and as cable insulation. It is also used in laminates made of aramid paper and glass fabric and as a carrier material for adhesive tapes. Polyimidfolie Norton TH Norton® TH 16011 is a Polyimidfolie, Abbreviation PI, the most important structural feature of which is the imides. The polyimides are produced by condensation polymerisation and processed into film in a further chemical processing process. Norton® TH 16011 is a high-performance plastic that, in its unique combination, cannot be found in polymeric film materials. This makes it ideal for a variety of applications in numerous industries. Norton® TH 16011 has excellent chemical resistance; no organic solvents are known. Norton® TH 16011 is dimensionally stable,...

Read more...
Report - ArpaxX-Aramid Paper

Report – ArpaxX-Aramid Paper

Ahlhorn | 16.09.2011 The magazine "ELinfo ELECTRONIC INFORMATION" reported in the September issue under the heading "Aramid paper - New generation of products with improved properties" about our newly developed premium aramid paper. Particular attention is paid to the new technical properties of the product and the possibility of recycling the product. You can find the article here:Aramid paper.

Read more...
Coiltech 2011

Coiltech 2011

Ahlhorn | Pordenone | 28.09.2011 Coiltech 2011 - North Alpe Adria in Pordenone, is Italy's first trade fair specifically for the electric motor and transformer industry. Equipment and materials for the manufacture and repair of electrical machines and transformers are on display. This fair takes place from 28th to 29. September 2011 in der Fiere Pordenone, Viale Traviso 1, statt.

Read more...
Dr. Dietrich Müller at the 1st International Electric Drives Production Conference

Participation in the 1. International Electric Drives Production Conference

Ahlhorn | Nuremberg | 09/29/2011 Electric drives, one of the most important future technologies, were the focus of a conference that took place from 27. until 30. September at the Friedrich-Alexander-Universität Erlangen-Nürnberg. At the first international conference on the production of electric drives (1st International Electric Drives Production Conference - EDPC), developers, researchers and potential users exchanged ideas about the latest product and production technologies in this field. Dr. Müller presented the ArpaxX aramid paper. More than 350 participants from all areas of the value chain for the production of electric motors and generators took part in the conference. Renowned experts such as Ralf-Michael Franke, CEO of the Drive Technologies Division at Siemens AG, Dr. Manfred Wittenstein, CEO of Wittenstein AG and former President of the Association of German Mechanical and Plant Engineering (VDMA), who spoke about the challenges in the field of electromobility. Topics of the conference were the application and...

Read more...
COMPOSITES EUROPE 2011: New exhibitor record, winning innovations

COMPOSITES EUROPE 2011: new exhibitor record, award-winning innovations

Ahlhorn | Stuttgart | 30.09.2011 25 percent more exhibition space, 20 percent growth in the number of exhibitors, including numerous global players from the areas of CFRP and mechanical engineering: the COMPOSITES EUROPE trade fair took place at the Stuttgart exhibition center with over 350 international exhibitors from Europe, Asia and North America took place in the period from September 28-30, 2011. At the largest trade fair for composite materials in Germany, everything revolved around new lightweight construction concepts, material trends and state-of-the-art production solutions for the composites industry. This year, the focus of COMPOSITES EUROPE was particularly on the subjects of automation, manufacturing processes and series applications. With Toho Tenax, the SGL Group, Zoltek and Mitsubishi Rayon from Japan, four heavyweights from the CFRP segment exhibited at COMPOSITES EUROPE this year. Carbon Composites eV was also represented again, bringing its member companies BMW, EADS and Premium Aerotec to Stuttgart. Also in the...

Read more...
Thermipad - Dr. Müller GmbH: New Product for the solar industry

New gap filler for the solar industry

Ahlhorn | 04.11.2010 Thermipad TP 22601 developed as a very soft material. The Dr. Müller GmbH (Ahlhorn / Lower Saxony), a leading supplier of electrical insulation materials, heat-conducting products, seals and technical foils, has once again presented another product in its Thermipad range. Gap Filler Thermipad TP 22601 The new product Thermipad TP 22601 is a very soft gap filler that has only 10 Shore. Furthermore, the silicone formulation used made it possible to achieve a flammability rating of V0. The product has a thermal conductivity of 0.8 W / mk and can be used in a temperature range from -40 to + 150 ° C. The product was specially developed for a manufacturer of solar modules, but is also used in all areas in which a metal housing is used as a heat sink in order to optimize the connection to electronic components. The "Thermipad TP 22601" from Dr. Müller is a very soft gap...

Read more...
Working hours at the turn of the year 2011/2012

Opening times at the turn of the year 2011/2012

Ahlhorn | December 16, 2011 Merry Christmas and a Happy New Year 2012 We wish our partners, customers and suppliers and their families a Merry Christmas and a Happy New Year 2012. We look forward to being your competent contact in the coming year in the fields of electrical insulation materials, thermal conductivity products, seals and technical foils. At the turn of the year 2011/2012 our office is occupied as follows: December 19, 2011 8:00 am - 5:00 pm December 27, 2011 8:00 am - 5:00 pm December 20, 2011 8:00 am - 5:00 pm December 28, 2011 8:00 am - 5:00 pm December 21, 2011 8:00 am - 5:00 pm December 29, 2011 8:00 am - 5:00 pm 12/22/2011 8:00 a.m. - 5:00 p.m. 12/30/2011 8:00 a.m. - 5:00 p.m. December 23, 2011 8:00 am - 5:00 pm The last day of dispatch in 2011 is December 30th, 2011. From 02. January 2012 we are at your disposal...

Read more...
The 30th Motek 2011 and the 5th Bond Expo

The 30th MOTEK 2011 and the 5. Bondexpo

Ahlhorn | Stuttgart | 09/27/2011 The 30th MOTEK 2011 and the 5. Bondexpo, take place from 10. until 13. October at the Landesmesse Stuttgart. automation, is the perfect platform for specialists and suppliers from the following sectors: metal and plastics processing, electrical and electronics industries as well as solar, automotive, mechanical and plant engineering. The 30th Motek, or Industrial Handling, focuses on mechanical engineering and the whole world of automation. This year it offers remarkable topics in its exhibition program such as: assembly, handling, joining, control, integrated systems, microtechnology, etc. In addition, the 5th Bondexpo offers its visitors an exhibition program with raw materials for adhesives and sealants, machines, systems and accessories for the adhesive manufacturing industry. At the trade fair for bonding, insulating, potting and foaming, the participants are informed about important topics from the latest innovations in the areas of mechatronic developments, micro and nanotechnology and medical technology through exciting activities.

Read more...
Dr. Dietrich Müller takes over-representation of Italian bobbin manufacturer.

Representation of an Italian bobbin manufacturer

Ahlhorn | Italy | 01/17/2012 The Dr. Dietrich Müller GmbH, a leading supplier of electrical insulation materials for the production of electric motors and transformers, is taking over the representation of the company Cierre from Italy with immediate effect. Cierre is a leading European manufacturer of Bobbins used in the manufacture of transformers. As an innovative company, the company has various patents in the area of ​​the product range "Bobbin“. In addition to the bobbins, Cierre also offers an extensive range of accessories for transformer construction, such as terminals, soldered connections, insulating sockets, and potting hoods. In addition, the Dr. Dietrich Müller GmbH from its own production program feathered ribbons, Side insulation, insulation parts, and adhesive tapes made from common electrical insulation materials, such as Nomex, Mylar, and laminates made from these materials. The delivery program is supplemented by pultruded profiles made of GRP and adhesive tapes.

Read more...
Henkel

Changes to handle products: Loctite 401, 406 and 454

Ahlhorn | 15.02.2012 Henkel has announced that the performance of the Loctite 401, 406, and 454 products has been improved. In an extensive development process, it was possible to achieve that the temperature resistance could be increased. In particular, the product Loctite 401 is used to bond sockets in CNC parts made from hard paper. There were also changes in the raw material composition of the Sicomet products. You can request the updated technical data sheets, the safety data sheets and further information from us.

Read more...
Dr. Dietrich Müller GmbH: Have great expectations on their 14th appearance at this year’s CWIEME Berlin 2012.

CWIEME Berlin 2012

Ahlhorn | Berlin | 13.03.2012 From 26. until 28. June 2012 the renowned leading trade fair CWIEME Berlin 2012 takes place, which is characterized by a strong presence of many global players in the fields of electromagnetic coils, transformers and electric motors, including more than 600 participating companies from 40 countries. At CWIEME Berlin 2012, the largest trade fair for coil winding, electrical production systems and electrical insulation materials, everything revolves around the latest products, machines and system trends and the latest production solutions for this industry. For the 14th For the first time, the company Dr. Dietrich Müller GmbH at this year's CWIEME Berlin 2012 at booth 2425 in hall 1.2 of the Messe Berlin and represents the Italian companies Cierre snc and Cibisol Srl as well as Intaf from India. The Dr. Last year, Dietrich Müller GmbH successfully presented its new product line "ArpaxX" at CWIEME 2011, which is developed and...

Read more...
Copper winding - also strong in thermoplastics

Also strong in thermoplastics

Ahlhorn | 24.08.2012 Even if the Dr. Dietrich Müller GmbH machines in the composites production area with a focus on thermoset materials, thermoplastic materials are also processed. Polyamid PA 46 red-brown PA 46 is mainly used in the higher temperature range, where the stiffness, tracking resistance, permanent heat resistance and fatigue resistance of PA 6, PA 66, POM and PET are no longer sufficient. PA 46 is therefore suitable for high-quality technical applications in apparatus construction, in electrical engineering and in the automotive industry. Polyamid PA 6 nat./schw. Very tough, even in the cold. Hart. High damping capacity. Technical parts such as gears, pinions, screws, nuts, bearings, seals, coupling parts, guide parts, pump parts, fittings, housings, bobbins, etc. Polyamid PA 66 nat./schw. The polyamide with great hardness, rigidity, abrasion resistance and dimensional stability in the heat. Preferred polyamide for highly stressed and heat-stressed parts in electrical engineering, in machine, vehicle and apparatus construction. Polyamide PA 66 GF 30 30% glass...

Read more...
Motek

Motek 2012

Stuttgart | 08.10.2012 At approx. Every year more than 1000 exhibitors meet an international audience of around 37,000 trade visitors at Motek with 60,000 square meters of exhibition space. Consistent target group orientation is one of the secrets of Motek's success. The main target groups are, for example, the automotive, mechanical and device engineering, electrical and electronics industries, medical technology and solar production. The bare numbers speak for themselves: over 900 exhibitors at Motek - international trade fair for assembly, handling technology and automation, over 100 exhibitors at Bondexpo - international trade fair for adhesive technology, and thus the available halls 1, 3, 5, 7 and 9 of the state fair Stuttgart completely occupied: In autumn 2012, the high-tech region in southern Germany will once again host the whole world of production and assembly automation! Motek 2012 - Industrial Handling and more ... The bare numbers speak for themselves: over 900 exhibitors at Motek - international...

Read more...
Glasstec

Solarpeq: The trade fair for solar technology

Ahlhorn | 22.10.2012 Solarpeq is the new top event in the solar industry. The trade fair for solar production technology takes place parallel to the world's leading trade fair glasstec and offers an international forum for everyone who offers or wants to buy machines for the production and processing of silicon, wafers, solar cells and modules. More than 250 exhibitors from over 30 countries came to the first event in September / October 2010 to present their products. In total, over 55,000 trade visitors are expected at solarpeq and glasstec. Am 22. and On October 23, 2012 the conference “solar meets glass - 3rd Industry Summit for Markets, Costs and Technology” will take place for the third time in the Congress Center East on the Düsseldorf exhibition grounds. glasstec / solarpeq 2012: Solar meets Glass conference is establishing itself New edition in cooperation with Solarpraxis and OTTI in October 2013 The conference “solar meets glass...

Read more...
Mylar insulation film: suitable for many applications

Mylar insulation film: suitable for many applications

Ahlhorn | 01.11.2012 Mylar insulating films are often the material of choice when it comes to developing insulating parts for enclosures. Mylar is UL-approved, easy to process and available from stock in various thicknesses at any time, and offers a number of other advantages. Mylar is very easy to die-cut and is also available in various self-adhesive thicknesses. Mylar polyester film is manufactured and sold by DuPont. Mylar insulation film: suitable for many applications

Read more...
Lumirror Polyester Film

Lumirror polyester film available at short notice

Ahlhorn | 06.11.2012 Lumirror polyester films from the quality manufacturer Toray are also available from Dr. Dietrich Müller GmbH available. The Toray company produces polyester films in a thickness range from 0.012 - 0.5 mm. These polyester films can be used for various applications: Electrical insulation film is one example. The polyester films are also UL-approved and retain their position even after processing by Dr. Dietrich Müller GmbH their approval. Samples can be made available at short notice. Lumirror-Typen Lumirror® 40.01 is a crystal clear polyester film that is available in the following thicknesses: 23, 36, 50, 71, 96, 125, 175 µm Lumirror® 45.11 is a crystal-clear polyester film with an antistatic finish on both sides, which is available in the following thicknesses: 96, 125, 165 µm Lumirror® 60.01 is a colorless, transparent polyester film that is available in the following thicknesses: 125, 190, 250, 300 µm Lumirror® 60.61 is a milky-white polyester film that is available in the...

Read more...
Electronica

Electronica 2012

Electronica 2012 will take place from November 13th to November 16th, 2012. The fair focuses on semiconductors, Opto-electronics, and microelectronics. Electronica 2012 will take place from November 13th to November 16th, 2012. the Fair focuses on semiconductor Opto-Electronics microelectronics Sensors electronic components / assemblies Electromechanics Printed circuit boards System components Hybrid circuits counter Keys Relais Connectors cable Microwave technology Display Transformers Electromagnetic compatibility CAD FALLS OFF Power supply systems Measurement / testing technology discrete components System peripherals Microsystem technology Venue Munich Opening times + dates Tuesday,11/13/12 9:00 a.m. - 6:00 p.m. Wednesday, 11/14/12 9:00 a.m. - 6:00 p.m. Thursday, 11/15/12 9:00 a.m. - 6:00 p.m. Friday, 11/16/12 9:00 a.m. - 6:00 p.m. organizer Munich No. 9 / 20. September 2012 Displays and LEDs - The next generation The latest technologies at electronica 2012 Even more compact and flatter with better resolution and higher contrast - this is how the latest displays score at electronica 2012. LED technology is also on the advance. The implementation of the EU's Ecodesign Directive is generating new, positive impulses in the market for innovative light sources. From 13. until 16. November exhibitors from...

Read more...
Vietnam Electronics

Vietnam Electronics Ho-Chi-Minh-Stadt 2012

Vietnam Electronics is an electronic products exhibition in Vietnam. The exhibition offers visitors the opportunity to find out more about the fast-growing Vietnamese electronics sector and to make new business contacts. In particular, the following offers are being advertised: Computer accessories, electrical devices, electrical cables, electric motors, electronic components, electronic accessories, energy-saving products, household appliances, high-tech products, communication technology, mobile radio devices. In addition, a congress will be held at which experts from all over the world will provide information on industry trends. Trade fair date: 14.11.2012 - 17.11.2012

Read more...
UL-approved GRP profiles

UL-approved GRP profiles

Ahlhorn | 12.11.2012 Various of our GRP profiles are also available in UL-approved versions. This ensures that our customers have easier approval in their UL system and thus enables them to open up further markets. The Dr. Dietrich Müller GmbH mainly supplies profiles that are used as insulation profiles in all areas of electrical engineering. Our profiles are used in particular in transformer construction as a dogbone and as a corner profile and in electrical engineering as a slot locking bar. Various of our GRP profiles are also available in UL-approved versions. This ensures that our customers have easier approval in their UL system and thus enables them to open up further markets. Dr. Dietrich Müller GmbH mainly supplies profiles that are used as insulation profiles in all areas of electrical engineering. Our profiles are used in particular in transformer construction as a dogbone and as a corner profile and in electrical engineering as a...

Read more...
Thermally conductive pastes with IMDS entry

Thermally conductive pastes with IMDS entry

Ahlhorn | 03.01.2013 Various thermal pastes from Dr. Dietrich Müller GmbH are listed in the IMDS database. IMDS is the international material data system for the automotive industry. Almost all automobile manufacturers are currently represented in this system and use the IMDS to transmit material data. Different Thermal paste n the company Dr. Dietrich Müller GmbH are listed in the IMDS database. IMDS is the international material data system for the automotive industry. Almost all automobile manufacturers are currently represented in this system and use the IMDS to transmit material data. That IMDS (International Material Dthey System) is an archive and administration system of the automotive industry, on the basis of which a material data-sheet is created, in which all materials used and proportionate substance components are named for the component in question, as well as all data required for the subsequent recycling of the vehicle part. The IMDS was developed jointly by...

Read more...
eltec 2013

eltec 2013: tradition meets innovation

Ahlhorn | 09.01.2013 For the 30th For the first time, eltec will open from 16. until 18. January 2013 their doors. The anniversary edition of the trade fair for electrical and energy technology surprises with a new online ticket shop, bright future ideas for e-technicians, the latest e-house and much more. Anniversary: ​​30. Trade fair for electrical and energy technology New: online ticket shop Outlook: The latest supporting program For the 30th For the first time, eltec will open from 16. until 18. January 2013 their doors. The anniversary edition of the trade fair for electrical and energy technology surprises with a new online ticket shop, bright future ideas for e-technicians, the latest e-house, and much more. A preview of three exciting days of the fair in Nuremberg is already available at: www.eltec.info Since 1979 eltec has been a trend barometer and a popular meeting place for electrical specialists from trade, industry and wholesale. Initially,...

Read more...
Active

APTIV® PEEK film withstands extreme conditions

Ahlhorn | 13.01.2013 In the aerospace and fuel cell industries, harsh environmental conditions place ever higher demands on filter media. APTIV films offer solutions in a combination of different properties, including resistance to aggressive substances at extremely high temperatures as well as very good mechanical properties. Die-cut parts made from PEEK film The Dr. Dietrich Müller GmbH supplies punched parts, molded parts and adhesive tapes made from Aptiv films. (Ahlhorn / Hofheim, 24.06.2011) Victrex APTIV films with a unique combination of properties offer engineers and designers completely new solutions for high-performance applications. The extremely versatile thermoplastic film is already used in numerous demanding applications in a wide variety of areas and markets, such as electronics, acoustics, aerospace, automotive, industry, oil and gas, chemical industry. Production of the PEEK films APTIVTM Foils are made from VICTREX® PEEKTM Polymer manufactured and have all VICTREX in a flexible form® PEEKTM Polymer properties. APTIVTM For processors, designers, and end-users, foils...

Read more...

Electric vehicles in quantities from 2017

Ahlhorn | 21.01.2013 In 2012, according to the electromobility development plan, the transition from the market preparation phase to the market ramp-up phase took place. Almost all German automobile manufacturers will offer complete product ranges from 2014 onwards. From 2017 onwards there will be talk of a volume market. The Dr. Dietrich Müller GmbH supplies solutions for the electric drive train, battery thermal management and battery charging technology.

Read more...
Construction 2013

BAU 2013: Even more international, even more professional, even more innovative

Ahlhorn | 24.01.2013 BAU, the world's leading trade fair for architecture, materials, systems, has become even more international, even more top-class and even more professional: Exhibitors enthusiastic: "BAU is the trade fair you have to be at" With over 235,000 visitors, the record level of 2011 was reached again For the first time more than 60,000 international visitors Top architects such as Daniel Libeskind and Christoph Ingenhoven confirm the importance of BAU as the world's leading meeting of architects BAU, the world's leading trade fair for architecture, materials, systems, has become even more international, even more, top-class, and even more professional. This is the denominator that can be summed up in 6 successful days of the trade fair, which the industry platform no. 1 once again brought full halls with enthusiastic exhibitors and visitors. Despite sometimes adverse weather conditions with snow-covered roads and hundreds of flight cancellations, more than 235,000 trade visitors came to Munich, again...

Read more...
Special components

Pertinax processing from panel thicknesses up to 200 mm

Ahlhorn | 25.01.2013 The Dr. Dietrich Müller GmbH produces milled parts from Pertinax in a thickness of up to 200 mm on modern CNC machining centers. These prefabricated parts are used in general mechanical engineering. Even Hartmatte 2471 respectively. UP GM 203 or glass hard fabric HGW 2372.4 orEP GC 203 can be supplied and processed in these strengths. These parts are mainly used in research and development. If you are interested, please contact composites@mueller-ahlhorn.com.

Read more...
Trade fair appearance

5th Electromobility Competence Meeting

Ahlhorn | 26.01.2013 Experts and decision-makers from the automotive, energy, electrical and electronics industries as well as representatives from politics will find Competence meeting for electromobility a platform to discuss projects from research, industry and politics. At the congress, important impulses are jointly set and recommendations for action are made. 5th Electromobility Competence Meeting am 13. - February 14, 2013 in Cologne Specialist congress In its fifth year, the congress has developed into one of the most important forums in the industry. The two-day program offers a variety of interesting lectures on the state of technology, marketing development and best practices in global electric mobility. High-ranking speakers from the board of directors and top management meet a competent specialist audience. Experts and decision-makers from the automotive, energy, electrical and electronics sectors as well as representatives from politics will find a platform here to discuss projects from research, industry and politics. At the congress, important impulses are...

Read more...
Bobbin with a diameter of 1500 mm

Bobbin with a diameter of 1500 mm

Ahlhorn | 27.01.2013 The Dr. Dietrich Müller GmbH has long been producing spools from Pertinax hard paper 2061, which are glued from a tube and two flanges using a temperature-resistant adhesive system. In addition, bobbins made of injection-molded material are supplied. Recently, the largest ever thanks to the Dr. Dietrich Müller manufactured bobbins are delivered: A bobbin made from a tube with a diameter of 1500 mm with flanges composed of segments. EP GC 203 was used as the material.

Read more...

Nomex 410: Stamped parts and molded parts from the specialist

Ahlhorn | 30.01.2013 Dr. Dietrich Müller GmbH from Ahlhorn processes all Nomex types (410, 411, 414, 993, and 994) into strips, Stamping parts, and molded parts. As a special service, Dr. Dietrich Müller GmbH offers to manufacture prototypes without tooling costs so that tests can be carried out with production-related parts in development projects. Dr. Müller also offers extensive product advice and data sheets. The Dr. Dietrich Müller GmbH from Ahlhorn processes all Nomex types (410, 411, 414, 993 and 994) into strips, stamped parts and molded parts. Dr. Müller offers extensive product advice and data sheets. NOMEX® is a synthetic aromatic polyamide polymer (aramid), which is characterized by a particularly stable molecular structure. This particularly stable molecular structure causes the excellent dielectric, thermal, chemical and mechanical properties of NOMEX® and opens up a wide range of application areas for NOMEX® products. NOMEX® papers and pressboards have been used as flat insulation materials for more than...

Read more...
Forum LED

ForumLED Europe 2013

Ahlhorn | 30.01.2013 With an annual growth rate of over 60%, the LED market is one of the fastest growing markets in lighting technology. At the conference, market-ready solutions with luminous fluxes over 1000 lm and a luminous efficacy of over 60 lm / W as well as a service life of 50,000 hours will be shown. Dr. Dietrich Müller GmbH delivers insulating film and Thermal interface material for the production of LED lighting systems. The event will take place from November 26-27 in Paris in the "Grande Halle de la Villette".

Read more...
Dr Dietrich Müller GmbH

Expert forum on quality

Ahlhorn | 04.02.2013 What successful companies do differently! - an event of the Leipzig Quality Initiative during Z and intec 2013. The Leipzig Quality Initiative traditionally invites you to its quality forum during Z and intec. This year the event will take place on Thursday, 28. February 2013, from 2 p.m. in the Conference Center Leipzig, room 5. The initiative asks the question "What do successful companies do differently!" into the focus of consideration. The Leipzig Quality Initiative traditionally invites you to its quality forum during Z and intec. This year the event will take place on Thursday, 28. February 2013, from 2 p.m. in the Conference Center Leipzig, room 5. The initiative asks the question "What do successful companies do differently!" into the focus of consideration. The speakers from companies will report on their experiences and activities from practice, then the topic "Liability issues in QM" will be continued. With this event, the quality...

Read more...
INTEC trade fair for manufacturing technology

Intec 2013 with a special show for processing new materials

Ahlhorn | 14.02.2013 The processing of new materials, one of the key topics in production technology, is available from 26. February to 1. March 2013 in the spotlight of the Leipzig mechanical engineering fair Intec. As part of a special show "Processing new types of materials and composite materials", exhibitors from research and practice will show how, for example, fiber composite materials can be processed in series production in an energy- and resource-efficient manner. The processing of new materials, one of the key topics in production technology, is available from 26. February to 1. March 2013 in the spotlight of the Leipzig mechanical engineering fair intec. As part of a special show "Processing new types of materials and composite materials", exhibitors from research and practice will show how, for example, fiber composite materials can be processed in series production in an energy- and resource-efficient manner. The Leipziger Messe was able to win over the...

Read more...

Thermal management solutions for perfect thermal conductivity

Ahlhorn | 20.02.2013 Electronic components of all kinds generate heat due to their power loss during operation, which limits their performance. In order to dissipate this heat, heat sinks are used to avoid an excessively high ambient temperature, which reduces the performance and service life of the components. Dr. Dietrich Müller GmbH offers a range of conductive adhesive films especially for connecting components with heat sinks, Thermal pads, and adhesives as well as Thermal paste to ensure efficient heat dissipation. Electronic components of all kinds generate heat due to their power loss during operation, which limits their performance. In order to dissipate this heat, heat sinks are used to avoid an excessively high ambient temperature, which reduces the performance and service life of the components. The Dr. Dietrich Müller GmbH offers a range of conductive adhesive films, heat-conducting pads and adhesives as well as heat-conducting pastes specifically for connecting components with heat sinks...

Read more...
Polyester film for transformers and electric motors

Coated Nomex papers for transformers and electric motors

Ahlhorn | 01.03.2013 In addition to pure Nomex papers, Dr. Dietrich Müller GmbH also offers laminates Nomex with Polyester film and Polyimidfolie. Stamped and molded parts are also manufactured from this. The product range also includes Nomex papers coated with epoxy resin on one and both sides. These can be in the form of tapes and stamped parts for the Transformatorenbau and the Electric motor construction to be delivered.

Read more...
Energy Storage

Energy storage in Düsseldorf

Düsseldorf | 10.03.2013 The energy supply is about to change. Last but not least, the events in Japan last year and the German nuclear phase-out are helping to push the energy transition into the near future. The event will take place on 18. and March 19, 2013 in Düsseldorf. At Energy Storage 2013, practical and economical storage technologies will be examined against the background of current developments in the energy sector. China Energy Storage Alliance, India Energy Storage Alliance, California Energy Storage Alliance, IPVEA, and Eurobeat support storage event in Düsseldorf. Berlin / Düsseldorf, 3. Dezember 2012: For the conference fair Energy Storage - International Summit for the Storage of Renewable Energies, the international association's China Energy Storage Alliance (CNESA), India Energy Storage Alliance (IESA), California Energy Storage Alliance (CESA), International Photovoltaic Equipment Association (IPA) as well as the Association of European Automotive and Industrial Battery Manufacturers (Eurobeat), further strong partners are won....

Read more...
Special molded components

Insulating film with special properties: Formex

Ahlhorn | 11.03.2013 Formex is a flame-retardant polypropylene film, which is mainly used in the electrical industry. Due to its high dielectric strength, low moisture absorption and the UL94V-0 class, this film meets the requirements of the electrical industry when it comes to insulating parts and insulating films. Due to its excellent mechanical properties, Formex can be bent several times to create three-dimensional shapes without breaking or tearing the material. Formex is UL-approved, IMDS listed and ROHS conform. Stamped parts from Formex The Dr. Dietrich Müller GmbH produces punched and molded parts from the Formex foils.

Read more...
Video Camera Display

Extended office service

DownloadCall-backNewsletter Get your part price. In 1 minute. Thermiflex® Flexseal® Rigidiso® Thermipad® Thermigrease® Thermiglue® Pertinax® Online Shop Subscribe to our newsletter: Leave this field empty if you're human: RequestJobsPresse Discover now our wide-ranged job offers and have a career at Dr. Dietrich Müller. We are looking for: Wholesale and Foreign Trader Graduated in Electrical Engineer Main featuresKey FeaturesFilm gradesAptiv film typesPropertiesApplication examplesSecondary procedureUL – „Repackaged Recognized Components“ CompanyGap filler: New Product for the solar industryDie-cut parts from adhesive tapes Enquiries from all other countries: Tel: +49 4435 971010 Fax: +49 4435 971011 E-Mail: info@mueller-ahlhorn.com Let us know, which product you are looking for and we will give you the address of the right distributor. Direct request: Enquiries from the United Kingdom: Dr. Dietrich Mueller UK Limited Tel: +44 20 80894197 Fax:+44 20 80894198 E-Mail: info.uk@mueller-ahlhorn.com Ahlhorn | 11.03.2013 In order to be able to offer an extended service, Dr. Dietrich Müller GmbH is expanding its office opening times. The employees in sales and order processing at Dr. Dietrich Müller GmbH are now...

Read more...
International Converting Exhibition

ICE Europe 2013 – a great success

Munich | 03/27/2013 With a further 16% increase in trade visitors compared to the previous event, ICE Europe 2013 was the largest international trade fair for the converting industry to date. A total of 6,600 visitors from 64 countries came to Munich to find out about the latest products and services for the finishing and processing of web-like materials such as paper, film, foil and nonwovens. Machine demonstrations, technical discussions and establishing business contacts and networks were the focus of the trade fair. 401 exhibitors from 19 countries occupied a net exhibition area of ​​10,100m² at ICE Europe 2013. With their many trade fair innovations and innovative solutions, they have made ICE Europe a trade fair magnet for converting specialists from all over the world. Both exhibitors and visitors were extremely satisfied with the trade fair and are already looking forward to ICE Europe 2015, from 24.-26. March 2015, Munich Exhibition Center The...

Read more...
Hannover tradefair

Hanovermesse 2013

Ahlhorn | 01.04.2013 With its clear focus on core technologies and services in industrial production, innovations and efficiency, HANNOVER MESSE has received an excellent response from companies and institutions around the world. With five main themes, HANNOVER MESSE is very well positioned for the coming year. The areas of industrial automation and IT, energy and environmental technologies, drive and fluid technology, industrial supplies, production technologies and services as well as research and development represent the core of the industry. The world's most important technology event will take place from 8. until 12. April 2013 in Hanover. With its clear focus on core technologies and services in industrial production, innovations and efficiency, HANNOVER MESSE has received an excellent response from companies and institutions around the world. "The positive feedback from our customers and the excellent number of registrations are clear signals for a strong HANNOVER MESSE 2013", says Dr. Jochen Köckler, member...

Read more...
Prolight and sound

prolight+sound 2013

Frankfurt | 10.04.2013 With 41,000 visitors and 876 exhibitors from 41 nations, prolight + sound 2012 achieved the record results of the previous year. The largest international trade fair for events, installations and productions worldwide will take place in 2013 from 10. until 13. April in Frankfurt. For the event technology, Dr. Dietrich Müller GmbH adhesive tapes, color filter foils and diffuser foils. The Prolight + Sound combines an International fair of technologies and services for events, installation, and production to the largest industry get-together. the Prolight + Sound 2013 takes place from 10th to 13th April in Frankfurt am Main instead of. Comprehensive overview of products and services Like no other trade fair, Prolight + Sound shows a comprehensive overview of all products and services in the event industry. The leading international trade fair is the meeting point for exhibitors, trade visitors, dealers and professional users from all over the world for four days. The...

Read more...