Thermal grease and paste
Thermal Grease
Our thermal paste in short:
- Heat conducting pastes with silicon or silicon free
- Operating temperature range up to 350 °C
- Effective heat transfer
- High thermal conductivity
- No spreading
- No bleeding
- No creep
Our new development of Thermigrease TG 20033 covers a temperature range up to 1200 °C.
Product range of thermal compound
Dr. Dietrich Müller GmbH supplies heat transfer pastes on a silicone-free or silicone-containing basis. The heat-conducting pastes work in a range of -180 to +1200°C. The paste Thermigrease is a high-temperature heat-conducting paste.
Fields of application for thermal paste
Thermal conductive pastes are used in many areas of electronics where fast and efficient heat conduction is important. With our pastes there is no expansion, no bleeding and no migration.
Thermigrease heat-conducting paste is most frequently used for small components such as computer processors or power electronics components.
But also in engine construction for light aircraft as well as in heating devices and Peltier cooling units.
Thermally conductive pastes fill out uneven areas and thus enable better heat transfer from the component to the heat sink.
Typical applications are heat sensitive components where an active or passive cooler is used.
It is used as an assembly aid for electronics, measurement and control technology and for improved heat dissipation of electronic components such as power transistors.
Package sizes for heat transfer pastes
The Thermigrease heat-conducting pastes are supplied in various container sizes.
Application of heat-conducting pastes
For the application of heat-conducting paste, as little as possible and as much as necessary.
The layer thickness should be as small as possible so that the heat-conducting paste completely fills the unevenness between component and cooler, but does not increase the distance between the two bodies.
We also supply a template to measure the layer thickness of the thermal paste.
Sources of supply for heat-conducting paste
You can buy the heat conducting pastes directly from Dr. Dietrich Müller GmbH or from distributors.
New development Therrmigrease TG 20033
Our new development Thermigrease TG 20033 covers a temperature range up to 1200° C. This heat-conducting paste is therefore mainly used in high temperature applications.
Our heat conducting pastes are used in the following industries, among others:
Plastics Industry
Extrusion die heating systems, hot runner distributors, press moulds, screen changing equipment
Shoe machinery industry
Vulcanising presses and mould heating, pinching machines, hot stamping machines
Foundries
Core moulds and ingot moulds, die casting machines, vacuum furnace heating
Apparatus engineering and laboratory industry
hot plates, industrial baths, distillation plants, soldering baths, oil sump heating, sterilizing baths, oil preheaters
Wood machinery industry
Hot-melt adhesive, melting and application equipment, branding iron
Packaging machinery industry
Embossing, sealing and welding stamp heaters, carton closing machines, tube filling and closing machines
Medical Technology
Inhalers and sterilizers, polymerization equipment, dialysis equipment
General mechanical engineering
Small air heaters, expansion screw heating, bookbinding machines, refrigeration compressors
Sources of supply for thermal paste
Thermal paste can be purchased from us or from our dealers and distributors.
Thermigrease ®;is a registered trademark of Dr. Dietrich Müller GmbH;
Please select from the following forms:;
Spraying:; SP = 00001 (1g), SP 00 005;(5g), SP 00 030 (30g);
Tubes: ; TU = 00 115 (115g);
Cartridges:; KA = 00 340 (340g);
Cup:; BE = 00 500 (500g), BE 01 000 (1000g),;
Buckets:; EI = 10000 (10kg), EI 35000 (35kg);
